Kris Merkel
Forum Replies Created
-
It’s been awhile since I have worked in CS5.5 I though the option to choose a custom preset was there but I could be mistaken.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
The beauty of PrPro is that you can read and work with native files without the need to transcode first. Depending on your workflow it is perfectly acceptable to work in the native format and let AME do the heavy lifting at the end of the cut. Some codecs will perform better than others and depending on your workstation specs your mileage may vary.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
In your export dialog choose quicktime as the format and custom as the preset, and under video codec choose Prores
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Blu Ray and MPEG2 encoders need separate audio and video files for building the discs. For MPEG2 delivery for other mediums you will want to use an elemental stream.
For You Tube start with the YouTube presets in Media encoder as they are already set up with the YouTube specs.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
You can also look at the audio output settings in your audio prefs to make sure that the ioXT is set as the audio output also check your output mapping. It also could be just an incompatibility between the source audio sample rate and the sequence’s sample rate.
Can you hear the audio from the sequence when the settings are set to computer audio only?
How many channels of audio did the original fcp sequence have?
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Second That! You could try to put a heavy load to see if it happens in another application as well.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
How long is your video? If it is relatively short there is no reason to use VBR. Use CBR instead.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Your bitrate is set too High. Your server cannot keep up with that. For web streaming you will only need a bitrate of 8Mbs max.
I would try experimenting with lower bitrates until you find the sweet spot between bit rate, quality and file size.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
What you are describing is a computer issue and has nothing to do with AME except maybe additional power draw while encoding. I would guess your power supply is going bad. Is your OS generating a kernal panic when it restarts?
I have a phantom problem of my MBP panicing and rebooting, but it is not regulated to just when I am using AME or lifting a heavy load
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Are you exporting out of AE through the render que or using AME to export your video? What CODEC are you exporting to? What are your bitrate settings ect.
It is really hard to suggest anything without knowing specifics.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W