Jon Barrie
Forum Replies Created
-
The PSD you want to use must be doing or using something different that the other Photoshop file you tested. Colour space. Other option is to copy the content layers of the logo and paste them into an new PS file…
– JonHow many editors does it take to change a light bulb?
-
You probably need to set monitor 2 as your external preview by going into Playback settings.
You can get there by clicking in the top right triangle of the program monitor.
So long as overlay mode is set your monitor should be available.
– Jon 🙂How many editors does it take to change a light bulb?
-
I have a SONY Z1 and have never had issues with CS3 and capturing HDV/DV. There must be something conflicting with the system. Cineform might be causing some kind of conflict, I’ve had something like that in CS2. Did you install Vegas on the same system? I had that and found it did weird things to Adobe.
– Jon 🙂How many editors does it take to change a light bulb?
-
This is a compression problem. Try to crush the blacks using the fast color corrector.
Play with the black levels so the black areas come up blacker. It’s a fine balance to not darken the main image too much as it affects everything with a dark range.
Play with the gray level too.
– Jon 🙂How many editors does it take to change a light bulb?
-
Sounds like you need to reinstall the application. I’d uninstall it completely, then reinstall it, rather than do a repair install as it might not correct the issue in a repair.
– JonHow many editors does it take to change a light bulb?
-
are you sure the capture mode, camera output setting and project settings match. If one of them is on DV or HDV and the rest is not, especially the camera you’ll get this error. I had a similar problem only to find my firewire port on the camera had a problem. You are supposed to boot the computer, connect the FW cable to camera – then computer. Then turn on the camera. Windows makes a noise to identify the camera connection, then there will be options for which app you want to open. Now you open PPro.
If you have the camera on before you connect it to the computer you can damage the camera’s connection as there is a small electric pulse sent from your computer to the camera. When the camera is on at the same time you can cause a fault. I hope this is not your situation.
Have you got it to work on another computer?
– Jon 🙂How many editors does it take to change a light bulb?
-
Make sure the second source is setup to the correct layer. For example if you want layer 2 (your effect placed clip) to overlay the layer 1 video, the second source needs to point to the layer 1.
– jon 🙂How many editors does it take to change a light bulb?
-
Nested Sequences and Multiclip info won’t EDL. You can only EDL properly straight footage.
– Jon 🙂 -
Try all the different Native PPro Blur filters.
– Jon
(You’d get better results if you shot it, actually achieving depth of field DoF) -
It appears you’re Menu is not linking properly to the timeline. You would be much better off in Encore. You can see how things a connected better. Make sure you are using the correct marker types for menu, chapter, timeline.
– Jon