Bouncing Account needs new email address
Forum Replies Created
-
-
You must cut to the moving video at the exact same frame as your still image.
-
[rafalaos] “Set the two channels ind your time-line and pan one to the right and one to the left.
“[mpxxxxx] “In the capture window, the clip settings input channel setting of 2 is greyed out and won’t let me modify it.
“That indicates a different kind of problem.
-
That would take a LOT of DVD’s.
Assuming DV files, they take up 12+GB of space per hour.
A single layer DVD holds 4.7GB, and a dual-layer about 8GB.
Your best archive system may well be to buy additional external Hard Drives (500+GB) and copy your files over for storage.
Regardless of which you choose, you’d copy your capture scratch files to the new disks and save the disk(s) for future use.
-
Go to FCP User Prerences and make sure you have plenty of “Real-time Audio Mixing” tracks set (I use 15 to 20.)
Then…
Locate your AUDIO RENDER FILES folder and trash all of the files for this project that are in that folder.
Then, perform the Audio Mixdown again.If still no joy,
“make off-line” the clips with the problem audio and recapture from the tape. -
Just use the STROBE Video filter.
That’s what it’s designed to do. -
Is it in “Remote” mode.
First thing I though of.
-
[gizmo1160] “Try connecting another speaker to the output of your amp. connect this speaker (which you might call rear speaker) to the + positive of both left AND + positive of right speaker outputs of your amp.
This will give you the difference between L and R …
Its a fun effect on big stereo stuff, mono sound will NOT appear in the rear……
NOTE: this is NOT 5.1 surround ….. but fun ….
“Welcome to 1968!
😉
-
Make SURE your Canvas window (right window) in FCP is set to “Fit to Window”… AND that it has not been “pushed off” the edge of the computer screen or “pushed into” other windows.
Make sure your CANVAS View Menu (Box Icon with broken sides) is checked on Image or Image+Wireframe… NOT just Wireframe.
-
The first thing to always try is to Quit FCP, Restart the Mac, Open your FCP project and try again.
Next:
THE FOLLOWING COMES FROM THE KEN STONE WEBSITE:
“Over 5,000 years ago Confucius wrote: ‘If you are toiling away, you have changed nothing and FCP heads South on you, [starts behaving in strange ways] then it is time to trash your FCP Preferences.’ ”Click the following link for instructions.
https://www.kenstone.net/fcp_homepage/trashing_fcp_prefs.html
A great way to do this is to use “FCP Rescue” a free Apple Script that will Trash the Preferences for you (and restore nearly all of your user settings afterward).
There are versions for FCP (Pro) & FCE (Express) and a new one for FCP 5.Download these free Apple Scripts at
https://fcprescue.andersholck.com/
or
https://pistolerapost2.com/fcprescue/This is one FCP tip that has helped in solving hundreds of “odd” problems.