Replies – Forums – Andrew Mcleod – Page 3

Forum Replies Created

Page 3 of 9

← 1 2 3 4 … 9 →

Andrew Mcleod
August 31, 2006 at 5:59 am in reply to: BMD/PP2.0/Alpha Channels

Hi

Please can you supply information about the format and project settings you are using.
As at this stage I have not been able to replicate this issue Decklink 5.6

Please forward the information to Pcsupport@blackmagic-design.com

Thank you.
Andrew Mcleod
August 25, 2006 at 12:38 am in reply to: Cannot capture analog XLR audio input using Multibridge

Sorry not “Sync” Stable Black video.

thank you.
Andrew Mcleod
August 24, 2006 at 5:44 am in reply to: Cannot capture analog XLR audio input using Multibridge

Hi

To capture audio channels you need to supply a token video source for the audio to be embedded to. The token source should be the format you are working with. Blackvideo or sync as input via the SDI would work OK.

email support@blackmagic-design.com if you have any more questions.
Andrew Mcleod
August 21, 2006 at 4:30 am in reply to: Problem with audio input on multibridge extreme

Multibrridge Extreme requires a token video source to be supplied to capture audio channels accurately. The token video source should match the format of your project.
Audio channels are embedded with the video stream to remain syncronized.

The ‘token Video’ can be black video or any source that matches the format.

If you have any further questions please let me know.

pcsupport@blackmagic-design.com

Andrew McLeod
Blackmagic Design
Andrew Mcleod
August 21, 2006 at 4:20 am in reply to: How much better does it look?

The main difference is resolution.

HDV is 1440 x 1080 – where as HD is 1920 x 1080.

Uncompressed HD from a HD camera or Deck contains more image information.

HDV – Compressed sampling rate is 8 bit 4:2:0 — where as Uncompressed 8 or 10bit is sampled at 4:2:2. To the human eye this looks brighter color is richer.

The Decklink HD Extreme permits the capturing from Analog audio source while capturing Digital video. SDI video with a seperate audio tracks.
https://www.blackmagic-design.com/products/connections/index.asp?prodID=18

The connectivity it offers your machine is also worth considering the majority or cameras and decks are then available for you to work with, while still keeping the firewire port.

https://en.wikipedia.org/wiki/HDV

https://en.wikipedia.org/wiki/4:2:2

Let me know if you have anymore questions.

Andrew McLeod
Blackmagic Design
Andrew Mcleod
August 2, 2006 at 4:41 am in reply to: White frames in After Effects renders that use Blackmagic 10bit HD source footage on PC

Hi

You can use the Decklilnk 5.6 installer as a codec only installation package.
I recommend trying this first.

If the issue persists please email me @ pcsupport@blackmagic-design.com

Please include your system specification and your workflow format at codecs being used.

Thank you

Andrew McLeod
Blackmagic Design
Andrew Mcleod
July 24, 2006 at 4:23 am in reply to: Anyone getting “No Video Input” flashing on PCIe Decklink cards?

Hi

Please can all of the clients experiencing “No Video input” please provide the following information.

Model of Decklink card and format being used. System Specification including motherboard make and model.

Workflow and format. Is genlock or tri-sync being used if so what format is the sync signal.

email these to – pcsupport@blackmagic-design.com

Thank you

Andrew McLeod
Blackmagic Design
Andrew Mcleod
July 21, 2006 at 12:53 am in reply to: Lots-O-Crashes with Decklink Extreme and PPro 1.5.1

Recommended software versions should be:

DirectX9.0, SP2, Quicktime 6.5 or 7.x and Decklink 5.6

If the issue persists – please send me you system specifications including motherboard make and model to pcsupport@blackmagic-design.com

Bill is correct in saying that 1.5.1 has some limitations however it should not blow apart randomly.

Andrew McLeod
Blackmagic Design
Andrew Mcleod
July 21, 2006 at 12:50 am in reply to: HD System

Tri-Sync

You can use the signal passing through a multibridge on the analog componet output. G/Y.
It is possible to capture and playback via SDI without using Tri-sync.
Larger installations with numerous devices that require sync then yes.

Monitoring HD via an LCD screen requires the screen to support at least 1920 x 1080 pixels or else it will scale or clip the image.

Recommend.

Apple 23″ Cinema Display
HP L2335
Dell 24″ Dell Widescreen UltraSharp 2405FPW

email pcsupport@blackmagic-design.com if you have anymore questions.

Andrew McLeod
Blackmagic Design
Andrew Mcleod
July 11, 2006 at 2:11 am in reply to: DL HD Pro PCIe – convert S/PDIF to TOSLINK – possible?

Hi Sebastian

See the ULTRA MATCH PRO SRC2496

https://www.behringer.com/SRC2496/index.cfm?lang=ENG

Anymore questions please email – pcsupport@blackmagic-design.com

Andrew McLeod
Blackmagic Design

Page 3 of 9

← 1 2 3 4 … 9 →