Alan Lorence
1
COW Coin
Forum Replies Created
-
What other choices are there? (It’s been a while since I’ve used pI in Vegas).
Basically, if it works, that’s how it should be done. There may have been different ways of doing it, but I don’t think it made any difference.
Alan.
………………..
Alan Lorence
Product Manager
GenArts, Inc.
http://www.genarts.com
http://www.wondertouch.com -
You know, I completely forgot about that problem!
Was that on Windows, Mac, or both? (Can anybody confirm?)
Alan.
………………..
Alan Lorence
Product Manager
GenArts, Inc.
http://www.genarts.com
http://www.wondertouch.com -
You said this was Vegas 12, right? Can you do a screencapture session so I can see what the performance of your setup is with particleIllusion? I’ll get your version of Vegas installed and see how it works on my system with the same emitter.
Alan.
………………..
Alan Lorence
Product Manager
GenArts, Inc.
http://www.genarts.com
http://www.wondertouch.com -
Hmm. I’m pretty sure they should show up in the “check for updates” emitter library list, even on 3.0.4.1. Can anybody confirm that they *have* seen these new pro emitters show up in the free emitter list of the autoupdate dialog?
Alan.
………………..
Alan Lorence
Product Manager
GenArts, Inc.
http://www.genarts.com
http://www.wondertouch.com -
We’ll still need to figure out why the email was blocked, so I’m not going to delete that post. (I actually don’t think I have that ability anyway.)
Did you mention to the support team about the address being blocked?
Alan.
………………..
Alan Lorence
Product Manager
GenArts, Inc.
http://www.genarts.com
http://www.wondertouch.com -
Hi Jack. You shouldn’t need to use an update installer. Download the latest version here:
https://www.genarts.com/support/downloads/particleillusion/standalone
You’ll need to email support (at) genarts (dot) com for a new serial number.
Alan.
………………..
Alan Lorence
Product Manager
GenArts, Inc.
http://www.genarts.com
http://www.wondertouch.com -
We’re not aware of any performance issues in VP12, so please contact GenArts support and report any problems you’re having.
I’m not sure what you mean by “I still have an issue on how to use the extra emitters options”. What extra options? More details please!
Alan.
………………..
Alan Lorence
Product Manager
GenArts, Inc.
http://www.genarts.com
http://www.wondertouch.com -
Greg — most likely you won’t be able to activate that old version, as we’ve updated licensing to something that is more reliable (I hope that’s what people have found). We’re still on version 3.x, but you may need to download the latest update to get it working on Win 7. You could just try and see what happens, then download the update if needed from: https://www.genarts.com/support/downloads/particleillusion/standalone
If you do that you’ll need to contact support at genarts dot com though for a new serial number.
Oh, and download the bazillions of emitters that have been released since you last used it. 🙂
(On that note, I’ve got a new batch ready to release that many of you will be happy about!)
Alan.
………………..
Alan Lorence
Product Manager
GenArts, Inc.
http://www.genarts.com
http://www.wondertouch.com -
I agree — you probably dragged a layer upward in the layers window (upper left window). Drag it down to the bottom or r-click and “move down” until it’s below everything.
Alan.
………………..
Alan Lorence
Product Manager
GenArts, Inc.
http://www.genarts.com
http://www.wondertouch.com -
There is one specific library that contains a bunch of “replacement” emitters (adjusted to work in pIAE). Note that any emitters created *after* that library was released could still be over the pIAE component limit, but I don’t thing the “Diony” emitters fall into that category.
I’d suggest downloading the replacement library and putting them into a separate folder somewhere so you can review them all.
Alan.
………………..
Alan Lorence
Product Manager
GenArts, Inc.
http://www.genarts.com
http://www.wondertouch.com