Steve Regian
Forum Replies Created
-
These are probably Mpeg2 program streams.
VLC player should play them. Free
-
-
I have the same desire. During DG certification, I had a couple of problem areas and I would have liked to been able to see what they were seeing. I made a request to Telestream to develop a “player” for just this use. Maybe others will chime in.
-
I have the same desire. During DG certification, I had a couple of problem areas and I would have liked to been able to see what they were seeing. I made a request to Telestream to develop a “player” for just this use. Maybe others will chime in.
-
Had this same problem several times. Unplug power and leave off over night usually works. Power up Multi before computer.
-
Sure… you will use the Black Magic DV easy setup and you can control the deck through RS-422. We do this all the time… even with DV material.
-
I’m guessing it’s a hardware problem. We have 2 Multi’s (5.8 drivers) running on MacPros with 4 GB ram. Running BM card in slot 3, Seritek SATA controller in slot 4 and X1900 Video in slot 1. All outputs are active and working as expected.
-
May be overly obvious but did you select betacam from the Black Magic extension accessed from the system preference window?
Our MBE works great, except we have to toggle inputs to get audio to be available for monitoring.
-
Check the DeckLink control panel so that “Black Video Output to Deck in Capture” (or something like this as I am not in front of my edit machine so just trusting my feeble memory) is disabled. Weird quirk for this board drove me crazy ’til I figured it out.
-
I run into this a lot as we use uncompressed 10bit quite often and end up with little green artifacts and other miscellaneous stuff just there. Applying a matte choker works for us and adding a couple of pixels of blur helps clean up the edges.