Sean Kapleton
Forum Replies Created
-
brilliant much thanks!
ps. have you or anyone else tried the HDLINK Pro 3D and if so what are your thoughts on this? I previously used the HDLINK Pro which was limited to 8bit but what I found annoying besides the flickering when switching between HD & SD and various frame rates (possibly could be a Dreamcolor issue requiring firmware update?) was the fact that the HDLINK had a utility window not unlike the HDP2 which had tabs with different adjusters (1D RGB output, etc) which actually did need to be tweaked accordingly to get the right calibration.
-
hey great thanks for the pic just have a few questions
1) I have my blacks set 126 you had you thought yours was 125 – i just barely see the grey pluge so I am pretty sure this is correct – any thoughts?
2) luminance / brightness is 120 / 6500k whitepoint
3) Raster – why do you have this set to native?
4) you mention sometimes switching frame rights and SD but I thought the whole point of this box is that it would be able to properly detect and do this automatically – what am I missing?
thank you
sean
-
hello Jeremny
just curious what my settings on the Dreamcolor should be besides rec. 709 – i.e. do I adjust the brightness at all or just the blacklevel so I can just barely see the one pluge in the right bottom corner of a 1080i signal? currently I have the black level set to 126 and the brightness I did not touch at all so its on 120 – also whitep oint is 6500 – any other settings I should adjust on the Dreamcolor?
Its weird when I look at the whitepaper HP provides they say to set to Auto for Deep Color & Color Range but in order to see the pluge i indeed had to follow your advice – after calling AJA they didn’t even know this!
thank you
sean
-
so disappointed in the new 12 core : (
-
Hey Jerry
just curious if my sequence settings will then be different when I send from Color back to FCP?
thank you
sean -
Hey Jerry
I forgot to ask you what the project settings in Color will look like…when i send the sequence to Color it says the resolution is now 1920×1080 – is this correct even though in FCP it says HDV resolution of 1440×1080.
thank you
sean
-
Hey Jerry
yes makes total sense thank you so much for taking the time to reply
cheers
sean -
never mind i figured it out
thx. -
getting the same problem here too – going to try reduces to 6 cores and will let yall know what happens.
-
hey matt,
so i did not move the in point at all when bringing into CT and its from that first frame that we determined originally how the cadence was – regardless if i tried all 5 versions wouldnt one of them work if I was always parked on the same first frame for all attempts?
thanks
sean