Replies – Forums – Paul Coull – Page 7

Forum Replies Created

Page 7 of 9

← 1 … 6 7 8 9 →

Paul Coull
February 7, 2007 at 10:34 pm in reply to: Adding Fade Up and Fade Out Within Compressor?

Hi,

Have you tried sorensen squeeze instead. With that you can convert to several formats, cut down the movie and give it the fades in/out.

grafxflow

grafx that flow!
Paul Coull
February 7, 2007 at 10:24 pm in reply to: defragment hard drive

Hi,

The software I use is ‘techtool pro’ for hard drive maintenance.

grafxflow

grafx that flow!
Paul Coull
February 7, 2007 at 10:21 pm in reply to: 5.1 to 5.1.2

Hi,

If you have registered your copy on the Apple site there is a download section for final cut. It will probably ask you for your username and password and your serial number again. It should have links to all the other updates motion, soundtrack etc.

grafxflow

grafx that flow!
Paul Coull
February 7, 2007 at 10:13 pm in reply to: General errror 41

Hi,

I’m not sure on the software upgrading front. But you could try exporting to an older version via the:

‘File>Export>XML’ (Interchange Format Document)

then in your version of FC

‘File > Import > XML’.

Hope it helps.
grafxflow

grafx that flow!
Paul Coull
February 7, 2007 at 9:27 pm in reply to: DSR-11…. will it work for me?

Hi,

Your machine should be fine, but I do suggest being careful what format you wish to catch in. DV PAL should be good enough. It all depends on what you wish to output it on i.e. DVD. With DVD PAL your machine has less to process while capturing.

grafxflow

grafx that flow!
Paul Coull
February 7, 2007 at 9:22 pm in reply to: Light Saber Plug?

Found this for you.

https://ryanw.michaelfrisk.com/ryan-w/tutorials_sabers.html

grafxflow

grafx that flow!
Paul Coull
February 7, 2007 at 9:03 pm in reply to: General errror 41

Hi,

Are the versions of final cut the same i.e. 5, 5.1, 5.1.2.

regards
grafxflow

grafx that flow!
Paul Coull
February 7, 2007 at 8:33 pm in reply to: I’m losing my mind with EDIT TO TAPE!!!

Hi,

Is there no insert edit option? Assemble edit overites the timecode.

Try doing a three-point edit, that should allow the insert option to be available.

grafxflow

grafx that flow!
Paul Coull
February 7, 2007 at 5:23 pm in reply to: 16×9 footage craziness, argh!

Hi,

Don’t know if it would be easier to create a new sequence with anamorphic set and drag the other sequence inside and stretch it. Again it depends on how many clips are in your sequence.

regards
grafxflow

grafx that flow!
Paul Coull
February 7, 2007 at 5:20 pm in reply to: Footage trying to letterbox when moved toa new sequence

Hi,

Are you dragging the copied clips into the PAL sequence or dragging the NTSC sequence into it?

Also NTSC footage is smaller in height than PAL. NTSC = 720×480 , and PAL = 720×576 so you will get some black lines above and below.

grafxflow

grafx that flow!

Page 7 of 9

← 1 … 6 7 8 9 →