[Kristian Lam]

Hi Sean,

Here’s the link:

https://blackmagic-design.com/support/software/

regards

Kristian Lam
Blackmagic Design

[Kristian Lam]

Hi Bryan,

Are the thin vertical lines showing up in the Canvas window in Final Cut Pro as well or only on the HD Extreme’s output?

Is this 1080 DVCPRO HD or 720p? What framerate is it shot in?

Is the same thing happening when you move the file off the Xsan and play it off your internal drive of the Mac Pro?

regards

Kristian Lam
Blackmagic Design

[Kristian Lam]

[tek0967] “Do I use the component out from the Decklink and go the the RCA component in on the back of the Samsung?”

This is correct. You’ll need to use BMC to RCA adapters which should be easily available.

regards

Kristian Lam
Blackmagic Design

[Kristian Lam]

Hi,

This should work. Make sure you’re using the HDV presets we provide in Final Cut Pro’s easy setup. You should leave the View > Video Display option to the default HD output and not switch it to an SD device.

regards

Kristian Lam
Blackmagic Design

[Kristian Lam]

Hi,

You can capture component video with analog video if you opt for the DeckLink HD Extreme card. You’ll have to control the deck via firewire deck control but make sure the deck is able to down convert on its firewire output as Final Cut Pro does not allow HDV deck control without capturing via firewire so you’ll need to use either Firewire PAL or NTSC as the remote protocol.

You’ll need some form of level convert for the audio outputs of the deck if they’re consumer level. This tech note should help:

https://blackmagic-design.com/support/detail.asp?techID=174

For the video connectors, just get BNC to RCA adapters.

regards

Kristian Lam
Blackmagic Design

[Kristian Lam]

Hi,

I’ve replied to your email as well. Unfortunately, we are unable to reproduce this issue inhouse. Did you run the “Uninstall Blackmagic” application first before installing the newer drivers?

regards

Kristian Lam
Blackmagic Design

[Kristian Lam]

Hi Robert,

Do you have any issues when trying to do the same with Blackmagic Deck Control?

regards

Kristian Lam
Blackmagic Design

[Kristian Lam]

Hi Dan,

What’s the version of drivers you have installed?

regards

Kristian Lam
Blackmagic Design

[Kristian Lam]

Hi,

This is a question more suited for our developer mailing list. Kindly contact me at support[at]blackmagic-design.com and I’ll pass on the details. Thanks.

[Kristian Lam]

Hi,

You’ll need to be send video into the card as well in order to capture audio.