Replies – Forums – Kristian Lam – Page 17

Forum Replies Created

Page 17 of 143

← 1 … 16 17 18 … 143 →

Kristian Lam
September 28, 2010 at 7:38 am in reply to: Probem importing DigiBeta footage to Final Cut Pro through Black Magic Card via SDI

Hi,

[Kris Veenis] “3) I tried going into the Blackmagic preferences and changing those. Right now I have the output settings set to SDI & HDMI & Composite and input settings set to SDI Video and SDI audio I also have the input processing set to 1080i HD to SD letterbox 16:9 and HD to HD and SD letterbox.”

This should be set to “Off”.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
September 28, 2010 at 7:28 am in reply to: Could a BM Hardware Engineer PLEASE answer my questions so I can purchase your product?

Hi Aaron,

1. It’s HDMI 1.4a frame packing. Yes, that’s correct. However, if you don’t have a developer version of the PS3, the HDMI output will be HDCP encrypted so you won’t be able to capture.

2. No.

3. Not yet. It currently recognises the signal but captures to 480i.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
September 22, 2010 at 12:13 am in reply to: Getting UltraStudio Pro to work

Hi,

What motherboard (brand / model) do you have?

regards

Kristian Lam
Blackmagic Design
Kristian Lam
September 21, 2010 at 1:07 am in reply to: External Raid 0 FireWire HardDrive work with uncompressed capture?

Uncompressed 8-bit video (1080i0 requires about 120 MB/s of throughput. If you’re planning on using firewire 800 on the drive you’re referring to, it’s not going to be enough. If you use the eSATA connection on the QUAD model, then it should be ok.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
September 21, 2010 at 12:36 am in reply to: Do you need a X58 chiposet to run a Intensity Shuttle ?

Hi,

Of course, you can still record from the component output of your PS3.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
September 21, 2010 at 12:35 am in reply to: Device to capture SD from SDI

[John Pucci] “Is it possible with this device to monitor the output from the HD SDI of the camera via HDMI to an external field monitor while recording in SD at the same time?
“

Hi John,

No, Mini Converter UpDownCross has SD/HD-SDI outputs. You can daisy chain 2 converters together if you need to get the required outputs. For example, Mini Converter SDI to HDMI to get your HDMI monitoring, and then send the loop out to the UpDownCross to get your SD-SDI output for recording.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
September 21, 2010 at 12:30 am in reply to: Intensity Shuttle

Hi Danny,

This is a release to fix a rare audio issue we discovered.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
September 21, 2010 at 12:30 am in reply to: Blackmagic Design Mini Converter – UpDownCross

Hi,

The UpDownCross is all SDI outputs. If you down convert, you get SD-SDI output. If you need HD-SDI to analog composite or component output, use the Mini Converter SDI to Analog. Then you can set whether to output the down converted video as composite or component.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
September 15, 2010 at 2:00 am in reply to: HDLinkPro 3D not working

Hi Mike,

I contacted you directly via email 4 days ago but did not get a response.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
September 15, 2010 at 1:27 am in reply to: HDlink Pro Displayport output is 10 bits or 8 bits?

[Manuel López] “f SDI input of HDlink Pro Displayport is 10 bits, then output via displayport is 10 bits also?
Thanks
“

That’s correct. It is 10-bits.

regards

Kristian Lam
Blackmagic Design

Page 17 of 143

← 1 … 16 17 18 … 143 →