Kris Merkel
Forum Replies Created
-
You can do that easily in After effects.
see this thread:
https://forums.creativecow.net/thread/2/931941“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Hi Joe,
Please try not to double post with relatively the same issue. If you have related problems try to keep it in the same thread.
For help on workflow and media management issues please see my comment on the previous post. Good luck.
kris
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
I am not sure about that workflow crashing PrPro or not, but it is certainly better to keep one clip in your project just for org. sake. If you end up using multiple instances of an asset you could run into problems when it comes time to edit the particular instance of that asset. Wasting a lot of time.
Your friend my want to pick up this book, An editors Guide to Premiere Pro, either in paperback or kindle version for a great primer on the best ways to work in the application.
https://www.amazon.com/Editors-Guide-Adobe-Premiere-Pro/dp/0321773012“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Are you using Dynamic Link? I just tried this and rendering previews provides me with a green line over the work area. after closing the project and then re-opening, the previews are still rendered.
You might want to give more information on your workflow because on my system it is working as it should. Unless you absolutely neet to there is really no reason to render your timeline before you output and PrPro is not really creating rendered files but rather Rendered previews, that you can use when you encode your output. The difference , for example, is that in FCP you would have to render to see your applied effects transitions ect in order to actually see what you cut. In PrPro with the MPE you can see your changes without the need for render.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Have you tried to clear your in and out points? It looks like you may have something highlighted selected outside the workspace.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Rendering out of PrPro is using the AME engin and will give you the same options. The benefits to using AME through render queue is that you can still work in PrPro during the render as well as using AME as a batch processor for different output files and locations.
Other than the differences in workflow rendering out of PrPro and using AME are exactly the same.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Your audio files will be the same as they are in the recorded files and that is determined on how you set them up. Example:assign the internal stereo mic to only record on channel 1 and the line in assigned to channel 2. I am not sure about the AF 100 but your audio record settings will be determined on menu or switch assignments.
You will not have 3 tracks of audio, just 2 and you can split them in to mono channels in PrPro.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Is it only “jumpy” in your program window and output preview or is it “jumpy” after encoding as well?
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
I am not sure why you mention your Decklink card as it should not have any role in your workflow unless you are outputting to an external recording device.
please share your workflow and export settings other than just 44.1 and 5.1 surrond. if it is going to DVD you will need to have a 48Khz sample rate for your audio.
Is your exported file really a 5.1 surround of a stereo mix or the other way around?
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Then the banding that you are seeing will be apparent in the final encode. 8bit is 8bit some of the filters that others have mentioned will help a little. I would also play with your encoding settings to achieve balanced results.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W