Jerry Alto
Forum Replies Created
-
Walter- I’d add a really cool cape and some wind effects. “Have No Fear, Underdog is Here!”
I LIKE it!
Jerry
G5 Dual 3GB Ram
FCP Studio 6.02
External 1 TB SATA Raid 0
Kona LH, Second system w AJA ioLA
Sony Z-1
GV-HD700 -
Walter- Rotoscope? What about all that space created from the old Walter to the new Walter? Would you make that transparent? Let’s see…… I think you had a tutorial on the garbage mat…..
Jerry
G5 Dual 3GB Ram
FCP Studio 6.02
External 1 TB SATA Raid 0
Kona LH, Second system w AJA ioLA
Sony Z-1
GV-HD700 -
Jeremy- Thanks Jeremy… it worked… at least for half of the clips. The workflow was right…. it is just dealing with HDV time code/control track. Unless you have 10 seconds of pre-roll forget it.
I kept getting stuck on the re-compress option in media manager.
Thanks for your help.
Jerry
G5 Dual 3GB Ram
FCP Studio 6.02
External 1 TB SATA Raid 0
Kona LH, Second system w AJA ioLA
Sony Z-1
GV-HD700 -
Kevin- You are right on. If you have multiple formats life becomes much easier in FCP if you bite the bullet and convert the media to the codec you want to edit in. Then import the assets into a FCP project that matches that codec. Choose a codec that your FCP system (processor speed, drive speed, memory, etc.) can handle with ease. This minimizes rendering and cuts editing time dramatically.
HTH,
JerryG5 Dual 3GB Ram
FCP Studio 6.02
External 1 TB SATA Raid 0
Kona LH, Second system w AJA ioLA
Sony Z-1
GV-HD700 -
Jason- Export via compressor.
HTH,
JerryG5 Dual 3GB Ram
FCP Studio 6.02
External 1 TB SATA Raid 0
Kona LH, Second system w AJA ioLA
Sony Z-1
GV-HD700 -
Lynette- Are there any other firewire devices plugged into the computer? If so shut down the computer and unplug ALL firewire devices. Then boot up, plug in the camera’s firewire cable and then turn on the camera. Go to the Apple Icon> about this mac> more info> firewire. Your camera should be there. If not then you have issues with your camera settings or cable. I know we had to install an inexpensive ($20) second firewire bus (pci card) to get our ioLA system to work with FCP.
HTH,
JerryG5 Dual 3GB Ram
FCP Studio 6.02
External 1 TB SATA Raid 0
Kona LH, Second system w AJA ioLA
Sony Z-1
GV-HD700 -
CHL- I agree totally. I remember the old Media 100 had a check box on what audio channels you wanted to send to the timeline. One of the few things I’ve missed since going FCP.
JerryG5 Dual 3GB Ram
FCP Studio 6.02
External 1 TB SATA Raid 0
Kona LH, Second system w AJA ioLA
Sony Z-1
GV-HD700 -
Claus- You have a mismatch between your clips and your timeline. You need to have ALL of your sequence settings match your clips.
HTH,
JerryG5 Dual 3GB Ram
FCP Studio 6.02
External 1 TB SATA Raid 0
Kona LH, Second system w AJA ioLA
Sony Z-1
GV-HD700 -
Bram- That be the anamorphic button in the browser, Bram.
HTH,
JerryG5 Dual 3GB Ram
FCP Studio 6.02
External 1 TB SATA Raid 0
Kona LH, Second system w AJA ioLA
Sony Z-1
GV-HD700 -
Andrew- You must have a dedicated firewire bus for HDV. No other firewire device can be active on the same bus. If you need an additional firewire bus buy an inexpensive PCI card.
HTH,
JerryG5 Dual 3GB Ram
FCP Studio 6.02
External 1 TB SATA Raid 0
Kona LH, Second system w AJA ioLA
Sony Z-1
GV-HD700