Eric Toline
Forum Replies Created
-
The ATR 3350 in the demo is perfect for “Event Videography”. I have friends who shoot weddings, confirmations, etc and they all use lavs in the under $50 range and it sounds fine. Another plus is that when the mic gets trashed you’re only out $50 max.
Eric
-
The AKG Blueline is a good choice. Nice part is that it’s a modular system with interchangeable capsules. I’ve had a set for years and have been very pleased with it’s performance. One caveat is that although the Blueline will run on 12v phantom you always want to feed it 48v phantom for best performance.
Eric
-
It’s called a 12v auxillary power socket today but you can plug a lighter into it.
Eric
-
Most obvious but best advice is to contact SD tech support.
Eric
-
-
You can send the unit to me and I will replace the antenna with a new one. Sennheiser charges $75 for this, I charge $50. Contact:
audioetc@bellsouth.net.Eric
-
A 50db pad will drop a “0” line level output to a very useable mic level.
Eric
-
Check out sync-n-link. Word is it can do batch processing.
Eric
-
‘Eric, I’ve got one more question.
Is there a difference concerning line-levels between the “Main Mix” of a mixer and say a “CD/Tape” output mix. Couldn’t find anything about that in the manuals (english and german).
If it matters, I have a (please don’t laugh – I know it’s anything but professional) Behringer XENYX 802 mixer.Any information greatly appreciated. Thanks in advance.”
——————————————————————
Peter,Yes there is a difference between the main mix out and the tape ot levels. Main mixout is usually at “0” level or 1.23 volts ac, tape out is at -10/.75v ac and is commonly called prosumer level. Your CD players output is at -10. Your home stereo receiver has -10 input and output levels on all the RCA connections on the back panel. Matching input to output levels is a good thing.
Eric
-
Yes I’m sure there will be no damage as long as the mic is plugged into the 1/8″ mic input. The 3-5vdc at the mic input is exactly the same voltage that a wireless transmitter provides to power the lav. Are you going to use the lav hardwired without a wireless system?
Eric