Forum Replies Created

Page 3 of 8
  • Ed Kukla

    September 30, 2009 at 11:51 am in reply to: Marketing the EX3

    This will depend on your client. I’ve seen some clients ask for HD and found out they wanted HDV at very low budget.
    My biggest roadblock has been clients that want tape for archiving. They refuse to accept card based recording. This is especially true with History & Discovery networks. I’ve been forced to use F900 or HDX900 at much greater cost to the client because of the network requirement to archive all materials on tape. SOME production companies will archive to tape after the shoot but most do not want to mess with all that. A one hour show can have 30 hours of material. That is a lot of work to transfer all that material to tape after the fact. Someday the networks will get up to speed with a good archival solution; but until then, tape is still king.

  • Ed Kukla

    August 28, 2009 at 10:59 am in reply to: Help – Sound Input to EX3

    Sounds like an issue with the wireless system.
    Try asking the question on the audio forum.

  • Ed Kukla

    July 22, 2009 at 12:57 am in reply to: clip names with premiere cs4

    Here is the answer Adobe gave…

    “The Media Browser does not display the metadata for files, simply its
    filename and location. If you would like to be able to easily
    differentiate between your files in the Media Browser you will need to
    change the filename rather than adding a name in the metadata for the
    file.”

    What will I be getting into if I change the filename?

  • Ed Kukla

    July 19, 2009 at 12:09 am in reply to: clip names with premiere cs4

    nobody use premiere and the EX cameras?

  • Ed Kukla

    July 1, 2009 at 12:57 pm in reply to: XDCAM Mac workflow using Clip Browser

    drag and drop is unsafe…I assume it bypasses the crc checks?

    copy/paste individual, selected or all clips will use the crc; assuming crc is selected in preferences?

    Just want to clarify all this

  • shouldn’t I be seeing the bpav folder in the destination drive after doing a “copy all”? I don’t.

    What is the purpose of checking “convert in mxf for copying ex…” in the preferences?

    If I copy some clips from card to hard drive then shoot more clips on the same card, how do I transfer the additional clips to the same hard drive/same folder?

    Thanks

  • Ed Kukla

    June 20, 2009 at 10:54 am in reply to: Shooting ex1 on board boat

    You could consider the SDHC card solution. The Transcend 16gb class 6 cards cost under $50, closer to $40 and when you buy a big quantity, I’d think you can make a better deal. Less than some HD tape solutions altho more than HDV. Give each camera enough cards to shoot without transferring to a hard drive. Saves the process of doing that during difficult conditions and saves space. You would not need external hard drives or a laptop. Take 4 of the MxR adapter cards and a lot of SDHC cards.
    There are counterfit SDHC cards out there. Make sure you buy from a mainstream seller like newegg or amazon (directly, not a 3rd party).

  • Ed Kukla

    June 18, 2009 at 11:55 am in reply to: Premiere Pro CS4 on a Mac?

    there is a pc version and a mac version. In talking to adobe premiere sales support, they told me there would be a difference in performance on a mac with the native mac version over the pc/bootcamp version. I have no experience to back up their claim…

    They no longer send out one set of discs with both versions, you have to choose pc or mac

  • Ed Kukla

    June 18, 2009 at 11:41 am in reply to: Transcend 16GB error issues

    are you confident you got real transcend class 6 cards?

    There are counterfit cards going around from 3rd party re-sellers and on e-bay.

    Go here to check the cards…

    https://www.transcendusa.com/Support/SerialCheck_tw.asp?LangNo=0&Func1No=2&Func2No=186

  • Ed Kukla

    May 29, 2009 at 10:24 am in reply to: EX3 New Lens Suggestions?

    As I understand it, the supplied lens adapter does not provide any connections to the electronics. Fuji makes an adapter that has a connector to jump the camera to b-4 mount lenses. It costs over $1500.

Page 3 of 8

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy