[Bobby Walker ii]

Hey Vincent,

From what I understand, RED is still a prototype at this point, though they are anticipating and early 2007 release…at the price point will be very hard to beat…if it lives up to the hype (which personally I think it will)

For more information go to red.com, where they have the latest info as well as footage actually shot using the new CMOS chip they’ve developed.

hth

bobby walker ii
broadcast video COW

G5 2.5GHZ DP,2.5 RAM, AJA IO LA, Medea G-Raid,FCP HD

[Bobby Walker ii]

If you have a newer version of AE then you probably have 3D Assistants from Digital Anarchy on your install disk. They do exactly what they say, assist you in setting up layers in AE’s 3D space.

If you have them installed then they would be under the “WINDOW” pull down on AE: Box creator, cubic distribution, spheric distribution. Read the instructions on your install CD to get more information, or you can go to DigitalAnarchy.com and buy the set.

I pretty much refuse to 3D without them in AE…btw, not anyway associated with DA, I’ve just been using them since they were published and like them a whole lot.

hth–

bobby walker ii
broadcast video COW

G5 2.5GHZ DP,2.5 RAM, AJA IO LA, Medea G-Raid,FCP HD

[Bobby Walker ii]

If you have a newer version of AE then you probably have 3D Assistants from Digital Anarchy on your install disk. They do exactly what they say, assist you in setting up layers in AE’s 3D space.

If you have them installed then they would be under the “WINDOW” pull down on AE: Box creator, cubic distribution, spheric distribution. Read the instructions on your install CD to get more information, or you can go to DigitalAnarchy.com and buy the set.

I pretty much refuse to 3D without them in AE…btw, not anyway associated with DA, I’ve just been using them since they were published and like them a whole lot.

hth–

bobby walker ii
broadcast video COW

G5 2.5GHZ DP,2.5 RAM, AJA IO LA, Medea G-Raid,FCP HD

[Bobby Walker ii]

Thanks Alan, as you suspected it wasn’t the October emitters.

A little playing around as it appears I had a bad blank emitter which was causing the problem. So now all is well.

Thanks again for taking time to help me.

bobby walker ii
broadcast video COW

G5 2.5GHZ DP,2.5 RAM, AJA IO LA, Medea G-Raid,FCP HD

[Bobby Walker ii]

Can’t advise while your missing it…since I am too, but try this site for a way to correct it.

https://www.dvinfo.net/conf/archive/index.php/t-43362.html

HTH-

bobby walker ii
broadcast video COW

G5 2.5GHZ DP,2.5 RAM, AJA IO LA, Medea G-Raid,FCP HD

[Bobby Walker ii]

You can also go back to your log capture window and change your clip settings to Aud+Vid Setting. Then proceed as Tom said by deleting your media. Hilight the clips you wish to batch capture and when the Batch Capture dialog box pops up under OPTIONS: uncheck the use logged clip settings. FCP will redigitize using your current AV settings.

hth

bobby walker ii
broadcast video COW

G5 2.5GHZ DP,2.5 RAM, AJA IO LA, Medea G-Raid,FCP HD

[Bobby Walker ii]

This has been discussed numerous times. Just do a search for Pixie Dust.

hth

bobby walker ii
broadcast video COW

G5 2.5GHZ DP,2.5 RAM, AJA IO LA, Medea G-Raid,FCP HD

[Bobby Walker ii]

To convert I’m partial to Flip4Mac…. https://www.flip4mac.com/wmv.htm

Price for the pro version that allows conversion is $49 US.

For recording off of the screen I like Snapz Pro X…. https://www.ambrosiasw.com/utilities/

Price is $69 US for the version to record in QT format

hth–

bobby walker ii
broadcast video COW

G5 2.5GHZ DP,2.5 RAM, AJA IO LA, Medea G-Raid,FCP HD

[Bobby Walker ii]

Nice animation Kathlyn…All Cowdog has is a cute little face…my best to you, Ron & of course Cowdog.

bobby ii

bobby walker ii
broadcast video COW

G5 2.5GHZ DP,2.5 RAM, AJA IO LA, Medea G-Raid,FCP HD

[Bobby Walker ii]

Try this oldie but goodie post from Mr. Rick Gerard…

https://forums.creativecow.net/cgi-bin/new_read_post.cgi?forumid=2&postid=651159&archive=T

hth

bobby walker ii
broadcast video COW

G5 2.5GHZ DP,2.5 RAM, AJA IO LA, Medea G-Raid,FCP HD