Replies – Forums – Marcus Ionis – Page 2

Forum Replies Created

Page 2 of 3

← 1 2 3 →

Marcus Ionis
December 16, 2006 at 12:01 am in reply to: MAC PRO KONA 3 External SATA

Thank You Vman06830, Jeremy G and others for the recommendation of CalDigit.
Just want to confirm if you have been able to capture 10bit Uncompress with out a hitch, if not please explain.

Thank You Again for Your Help & Professional Service

Marcus Ionis
Marcus Ionis
December 15, 2006 at 11:47 pm in reply to: Inconsistant “A” frame in 2:3

To My Knowledge you can not get a consistant “A” Frame without out deck control. The “A” frame must always be placed on “0” “5” or “10” frame.
Deck Control is very important in this process.

Good Luck

Marcus
Marcus Ionis
December 14, 2006 at 9:06 pm in reply to: MAC PRO KONA 3 External SATA

RocketRAID 2320 with the MAC drivers vs1.03 from https://www.highpoint-tech.com/
These drivers are for the MAC PRO 10.4.8

Hope this is helpfull

Marcus
Marcus Ionis
December 14, 2006 at 6:59 pm in reply to: MAC PRO KONA 3 External SATA

Thank You Guys for Responding

The External SATA drives are 8drives RAID 0 with 3.2TB of Storage from PROMAX. These drives were before used on POWERPC G5 Dual 2 with 4gig of RAM and using the KONA2 card 3.2 version of drivers. The system could capture and output feature length 1080i 29.97 at 10bit Uncompress with no problems. When we upgraded to the MACPRO and the KONA3, we hooked up the same External SATA RAID and started to have dropped frames on capture.

We then borrowed a FIBRE ARRAY with 16drives with 500gigs Striped RAID 0 and a APPLE FIBRE CHANNEL PCI EXPRESS CARD. We capture 2min worth of 1080i 29.97 DVCPROHD but crashed when we tried capturing 8/10bit Uncompress.

My question is why and how do I fix this.
Could I ever use these drives from PROMAX on the MACPRO and perform the above task?

Thank You Again for Your Help

Marcus
Marcus Ionis
October 17, 2006 at 7:34 pm in reply to: audio filter to compress time

Thanks Nick & Alex for your help.
Boy…do I miss my Avid.

Marcus
Marcus Ionis
August 22, 2006 at 9:48 pm in reply to: Problem w/ thrid party plugins

The Trapcode filters are supported only on After Effects.
E-mailed Trapcode and here’s the response:

Hello,

I’m afraid our plug-ins do not support FCP. I don’t know FCP so I cannot help you with the problem.

Best,
Peder Norrby / Trapcode

Has this been a problem with other 3rd party filters.
Obviously Trapcode doesn’t have a patch. So this is going to make future project challenging.

Thank You All for Your Wealth of Knowledge

Marcus
Marcus Ionis
August 2, 2006 at 5:24 pm in reply to: Capturing 25psf with KONA 2

[Marcus Ionis] “The KONA2 doesn’t have an “Easy Setup” and the KONA 3 I’ve been told has the hardware but doesn’t have the software.”

[Gary Adcock]
Marcus – both statements are incorrect. Even My Kona LH has easy setups for 1080i 25

Yes…I’m very aware of 1080 25i but my question is targert towards psf and p.
The client doesn’t want any interlace artifact in the capture. Also the system I’m on does have the current drivers.

Marcus
Marcus Ionis
June 21, 2006 at 5:31 pm in reply to: 720p drop frame sequence need better workflow

Thank you all for your help. I’ve contacted AJA & Apple on this issue. I can only hope this will be resolved in the very near future.
More people should sound off on this issue.

Again Thank You for Your Professional Help
Marcus
Marcus Ionis
June 15, 2006 at 2:16 am in reply to: Will the v2 drivers support fcp 5.0.4

Thanks for the info 🙂
Marcus
Marcus Ionis
February 9, 2006 at 10:30 pm in reply to: Has the exporting in AE7 become faster

SATA RAID 2.91 TB. Most likely we would do this project in sections….I’m just trying to get a faster export.
HD is a beast

Marcus

Page 2 of 3

← 1 2 3 →