Replies – Forums – Kristian Lam – Page 29

Forum Replies Created

Page 29 of 143

← 1 … 28 29 30 … 143 →

Kristian Lam
March 27, 2010 at 8:34 am in reply to: Will any cheapo 24″ 1920×1080 monitor work well with the Ultrascope

This is correct. As long as your monitor supports 1920×1080 or 1920×1200, you can run all 6 displays. If your monitor has a minimum of 1280×800, you can run the 2-Up view.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
March 26, 2010 at 8:43 am in reply to: Intensity Pro, ALOT of problems, Please help!

Hi Callum,

What format or codec are you capturing to? It looks like you’re capturing to a single hard disk and if you’re capturing uncompressd video, the hard disk will nt be fast enough to sustain the capture. Best bet is to try capturing using the MJPEG codec and see if that captures smoothly.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
March 26, 2010 at 8:40 am in reply to: Missing 8 bit codec

Hi Andre,

This is n longe necessary as Apple’s uncompressd codec now supports the right HD colorspace. We have not been using or including the Blackmagic 2vuy in our installers for quite some time now.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
March 17, 2010 at 10:39 pm in reply to: Linux Version for Ubuntu 9.10

Hi,

You’ll need to use one of the current range of DeckLink cards in order to use the Linux drivers. The DeckLink SDI card is a cost effective SDI / HD-SDI capture solution for Linux.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
March 16, 2010 at 6:28 am in reply to: Major Intensity Pro and MediaExpress issues with new video card

Hi Derek,

Will you be able to try Media Express 2.0.3? That has a smaller interface.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
March 15, 2010 at 12:52 pm in reply to: no hdmi out

Hi Leo,

Maybe it’s a case of a bad card where the HDMI output is faulty? I suggest speaking to your reseller and organising a swap.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
March 15, 2010 at 12:49 pm in reply to: Linux Version for Ubuntu 9.10

Hi,

v7.5.3 has been tested on Ubuntu 9.10.

What seems to the problem?

regards

Kristian Lam
Blackmagic Design
Kristian Lam
March 15, 2010 at 12:46 pm in reply to: MediaExpress 2.03

Hi,

Currently, the MPJEG quality settings cannot be changed. However, the quality should be very good. Maybe it’s worth double checking to see if you have any other codec packs installed on your system. There’s a chance the wrong codec is used due to a conflict.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
March 14, 2010 at 11:12 pm in reply to: Media Express 2 resolution requirement

You need to go into the Capture tab and you will be able to preview incoming video from the deck. Make sure you switch to the right video format settings in the Preferences as well.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
March 11, 2010 at 11:20 pm in reply to: 720p 23.98 playback to sdi monitor?

Hi Chad,

Try using the 720p59.94 8-bit output and see what happens. 720p SDI runs at 720p50 or 720p59.94.

regards

Kristian Lam
Blackmagic Design

Page 29 of 143

← 1 … 28 29 30 … 143 →