Kris Merkel
Forum Replies Created
-
Plural eyes uses audio sample rate to line up the footage, so when you are conforming your 25p footage make sure that your audio bit depth and sample rate match the other footage exactly.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
After you go through the standard troubleshooting options, repair permissions, clean cache ect. checking drive space you can dive in a little deeper and try to run the apps from the root user. If it runs fine in the root user than you know there is a conflict with your adobe install and your profile settings and you will be looking at doing a re install of the apps or, starting from scratch and installing the OS again then installing Adobe suite first and then everything else.
I have been down this road before and while starting from scratch seems like a PITA it will really make a difference in your workflow speed down the road. Also remember that your production machines need to be maintained on a regular basis in order for them to run optimally.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
As you have probably seen from the Forums on Adobes site that this is not possible with AME. You will have to use Episode or Compressor if you have it.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
There are mute, solo and record buttons just above the faders. If one of those buttons is enabled it will be highlighted. I am assuming that is not the case.
Have you tried moving your audio clips to different tracks? What sequence settings are you using?
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Did you save your audition project, If so reopen it, edit and then re send back to prpro
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Make sure that your audio 3 channel is set to the master or that it is not muted output in the audio mixer panel.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Yes, right clip on the clip and select rename from the pull down menu
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
That’s great to know! Is there an option for smart rendering or does it always do that with ProRes material?
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
Hi Chris,
Do you mean that you are exporting a cut and then re importing it into PrPro? You will only need to export to Prores if that is your deliverable, otherwise just encode your deliverable out of PrPro through AME. Unlike FCP, Premiere will re transcode Prores material back into Prores and Yes I have seen a visible degradation in an prores export compared to the original, but probably not noticeable to someone who has less discerning eyes. For that reason alone, I use FCP when I need to cut a Prores deliverable. How does it look on your reference monitor through your I/O card?
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W
-
The start with an h.264 preset in Adobe Media Encoder and choose the youtube setting that matches your sequence settings. Start with the stock preset and go from there for improving the quality of the encode.
“Think of everything in terms of building capacity.”
Kris Merkel
twitter: @kris_merkel
Product Manager, Flanders Scientific Inc.
http://www.shopfsi.com
Co-Founder, Atlanta Cutters Post Production User Group
http://www.atlantacutters.com2.2Ghz MBP core i7
16Gb RAM
CS6/FCP7
AJA T-Tap
AJA IO XT
FSI LM-2461W/CM-170W