Hector Melendez
Forum Replies Created
-
Have a HP multimedia center, AMD Athlon 64, and runs pretty good.
-
You can adjust volume levels on the “fly”. Go to audio mixer and change from read to “write” in the audio track you want to work. There are other funtions too.
-
Eduardo, de donde eres?
Posiblemente instalaste una version anteriormente?
No hay razon para que te de este error… -
I found that after I dissable the TL auto scroll now the playback is much better. Only problem now is that the Playback hesitate to start. The response to review back & forth is sluggish; not as PP1.5.
Any sugestion is welcome. -
Undo didn’t worked?
If not you can down the clip again from the capture bin… maybe in another secuence; make the trim again if you did some and copy paste to your working Timeline… just an example of what I will do.
Didn’t know other ways! -
My experience haven’t say that.
I have burned more than 1,000 PRODISC with no problem at all. All burned in a duplication tower to maximun speed (8x)
The first 200 -300 were burned from a Panasonic E-20 master and lastly the master comes from a Encore 1.5 at 8x.
Inclusive I made 30 DVD’s duplication of 2:40min… YES! I wouldn’t belief if I were not made by myself. I used Ulead WorkShop for Encode this dream. The video looks good at that compression…SO… check in Encore your settings. Look if the bitrates are between 6-8
(expand in project tap all the way to right) I set it to automatic encode. Check you don’t have more than one timeline. (Happened to me) -
I think is you select “show track volume” instead of “clip volume” you can adjust the whole track level. This is locate in the left side of the audio track in the timeline, 2nd icon from left to right
-
My workflow is as follow:
Open ENCORE, new project an name it.Import as assets: the avi file, the bkg. music and a still picture for the bkg menu. Then click “new menu” to load the default menu; change here the new bkg picture and new names.
After this, I click the avi file and select new timeline; select the chapters points, point and drag the chapters into the pre-made windows in the menu, drag the music bkg into the menu; click menu properties and select “loop forever” and click animate button.
.Then click the timeline & in properties drag the “end action” into the pink menu of the project.
Render the animate buttons, preview and finish is everything is ok.In this steps when going to make the “end action” is when I found 2 or 3 more timelines. Always I delete the timelines with the added num as example Wedding 1; wedding 2.
I have to pay attention to see what I’m doing in the exact moment when a new TL is added.
thks for any insight. -
Don’t know if this is what you’r taking but in the effects menu there is presets which make blur in or out of a clip. Play with this.
For a bip I but a clip in very fast motion and take the audio from this. Or simply cut the audio of a bad word.
I remember one time I found a down couter with a “bip” into Premiere but can’t remeber where -
My personal preference is to export as avi. A near 2 hrs takes about 1 hr to export. As Mpeg takes more, much more time and realized that Encore takes the same time to encoding both. So figure out