Guillem Ventura
Forum Replies Created
-
Yeah, I couldn’t find that either…
It’d be a good option, sometimes files come from other editing programs already used (in my case it’s the subtitles for a feature film, named subtitle_001.png, *_002.png, etc.) -
-
There’s a marker you can drag, you only see it when track height is higher than minimum, that may be the issue you didn’t find it 😉
-
Good one. Y and its variations is the key for that.
Pay attention it will only work on the highlighted track (the one in red). -
Basically you are complaining about the same behaviours of R9…
Has there been any change?
Is the response faster, with less lag?
What version of EuControl are you using? I tried 3 and it was so bad I downgraded to 2.7 -
I hate Mac as a brand, but I can’t stand working on a PC :-/
All I can tell you is that outputting 10-bit depends on your graphic card…
And this is not taken into account when you output video:
Resolve were smart giving out Resolve, now we all need their hardware to output.
Just make sure you feed your monitor with a decent SDI signal from your Decklink card.
HDMI is, indeed, 8-bit, so you may need to use DVI/DisplayPort if you’re feeding computer-signal into it. -
I’m looking at the same setup too.
A full 660 is barely the same speed as the iMac’s 780M…
https://gpuboss.com/gpus/GeForce-GTX-780M-vs-GeForce-GTX-660
(The 660ti is faster)
Let’s see what barefeats.com sais when they put it under test!My experience from working on both a MacPro with GT120+GTX285 and my 2011 iMac with a Radeon 6790 and specially a 2012 with a 680M… is that a Macpro is always a sturdier machine, but performance is not that far.
I guess it can’t compete with a Titan on a MacPro 5,1 but I still think it’s a perfect setup for the bucks.
Get an AppleCare though, we fried out 2012 iMac with the 680M and got it replaced, these machines are not build for 24/7 use 😉 -
What about the 23″ FSI??
They’re 3k and may do the job, even though they’re 8-bit…BM230? LM-2340W?
-
What’s your setup?
I’ve experienced lag always: using a Macpro 3,1 or 4,1 – then using an iMac.
Using an ethernet switch, or plugging it straight.
Tried on the iMac with no other doftware installed but OSX, Eucontrol and Resolve.
It always has lag (a delay between my action and it actually showing up in the image/scopes) -so I’m really looking forward to see how to make it work!
-
Thanks for the advice, but we’re getting beyind 5.000€ – a bit too pricey for a home setup, right?
I could get a 24″ FSI for that money, and OLED seems the way to go nowadays, right?
I am just wondering how outdated the HP is, I’ve used it for two years and I’m pretty happy with it, but black level is still milky and banding is still present.
Its ColorSpace setup is neat though…