Forum Replies Created

Page 46 of 60
  • Ernie Santella

    February 2, 2007 at 4:03 pm in reply to: WMV Conversion Favorites

    Ed,

    Have you compared Episode to Cleaner? Plus’s/Minus’s?

    I kinda’ want to stay in Mac for most of this conversion. I can do the transfer to PC for some really important higher-quality WMV files, but time is money and making AVI’s, copying them, moving to a different room, loading them etc is just too time consuming for most projects.

    Ernie Santella
    Santella Film/Video Productions
    http://www.santellaproductions.com

  • Ernie Santella

    February 1, 2007 at 4:59 pm in reply to: FCP freezes with new RAID drives

    This might help. I had a similar issue. It turned out to be one of my RAID drives was flaky. If you can’t figure your issue out, try creating a two-drive RAID and see if that fixes it. (You have to keep trying until you find the bad drive)

    Ernie Santella
    Santella Film/Video Productions
    http://www.santellaproductions.com

  • Ernie Santella

    January 29, 2007 at 8:01 pm in reply to: EQ’ing for OUTSIDE

    You question is kinda’ like why is the sky blue? There are so many variables. Outdoor where? Like at a concert, a backyard patio etc. There’s really no exact answer. But, try these ideas until it sounds close to what you think is correct.

    As far as which effects to use, First, I’d add pretty heavy compression to the music track as that will take it away from sounding like a ‘real’ music track and give it an FM quality. Then add reverb (try different size halls or rooms) Then, add some bass as most concerts always have the bass cranked and that usually overwelms the upper frequencies. If your going for a backyard and some speakers mounted on a patio. Then cut the bass as tiny speakers don’t have much.

    Hope that helps get you started.

    Ernie Santella
    Santella Film/Video Productions
    http://www.santellaproductions.com

  • Ernie Santella

    January 29, 2007 at 2:48 pm in reply to: F900 vs HDX900 Why we had a shoot off

    Thanks for posting that info. I’ve been amazed at my HDX900 since I bought it. Now, I really don’t regret any ‘second thoughts’ I had about the Sony.

    Ernie Santella
    Santella Film/Video Productions
    http://www.santellaproductions.com

  • Ernie Santella

    January 27, 2007 at 4:26 pm in reply to: Dropped Frames

    It could be a bad drive. I had this happen. One of my 5 RAID drives started acting up and it would drop frames once in a while. I replaced it and it fixed the issue. Just a thought.

    Ernie Santella
    Santella Film/Video Productions
    http://www.santellaproductions.com

  • Ernie Santella

    January 26, 2007 at 5:28 am in reply to: Dropped Frames

    It seems everytime I’ve read about a user getting dropped frames, it turns out to be their RAID. Is your’s fast enough? Or, more likely, is it nearly full? When drives get past 3/4 full, the speed drops significantly. Do you have an app that checks disk i/o speed?

    Ernie Santella
    Santella Film/Video Productions
    http://www.santellaproductions.com

  • Ernie Santella

    January 26, 2007 at 5:03 am in reply to: Kona 3 Freezing

    Fixed! But not after a bunch of brain-damage.

    The problem turned out to be I was selecting under View: 525i/29.97 instead of 720p/59.94. I was thinking it had to be set for SD instead of HD. All is fine and down-converting beautifully!

    Ernie Santella
    Santella Film/Video Productions
    http://www.santellaproductions.com

  • Ernie Santella

    January 26, 2007 at 5:02 am in reply to: FCP SD Kona 3 Downconvert

    Fixed! But not after a bunch of brain-damage.

    The problem turned out to be I was selecting under View: 525i/29.97 instead of 720p/59.94. I was thinking it had to be set for SD instead of HD. All is fine and down-converting beautifully!

    Ernie Santella
    Santella Film/Video Productions
    http://www.santellaproductions.com

  • Ernie Santella

    January 26, 2007 at 4:07 am in reply to: FCP SD Kona 3 Downconvert

    “Which Easy Setup are you using and what is your Video Playback set to in your Audio/Video settings in FCP? BTW, this really belongs in the AJA Kona Forum”

    Well, it may not be a Kona issue, as it might be my FCP settings.

    Easy Setup = DVCProHD 720p30
    Settings = Frame Size: 960 x 720 (Aspect HD (960×720) (16:9)
    Pixel Aspect: HD (960×720) Anamorphic Unchecked
    Compressor DVCPRO HD 720p60

    —————-

    VIEW>EXTERNAL VIDEO>ALL FRAMES is set

    After checking all this, I still get the freeze frame on ‘Play’.

    Ernie Santella
    Santella Film/Video Productions
    http://www.santellaproductions.com

  • Ernie Santella

    January 26, 2007 at 12:06 am in reply to: FCP SD Kona 3 Downconvert

    No dice. I’ve tried both ways you mentioned. Same thing, the video freezes on Play. Any other settings I need to set?

    Ernie Santella
    Santella Film/Video Productions
    http://www.santellaproductions.com

Page 46 of 60

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy