Eric Toline
Forum Replies Created
-
You are correct about the 552 and tc. You can use a lockit or an external syncbox that gets jammed from the master clock. Let the sync pros on the shoot set you up with the tc & frame rates.
Eric
“I push the RECORD button and hope for the best”
-
“Eric,
Literally tape a mike to the front of a PA grill? What type of mike do you use? An omni lav?<<<<<<<<<<<<<<<<<<<<<< A lav works just fine. Where exactly do you tape it? I have pointed a hypercardioid on a stand at a house speaker when I had no other option.<<<<<<<<<<< Anywear you can. Mostly on the side of the enclosure with the head just past the front of the cabinet Don't most PA speakers have some form of audio out that you can tap into send to your own field mixer?"<<<<<<<<<<<<<<<< Only the powered ones do and the DJ really doesn't like anyone plugging into his system because they have zero audio knowledge. "I push the RECORD button and hope for the best"
-
Peter,
Obviously you don’t work in the event video market where taping a mic to a speaker is always the fall back position. It’s better than nothing and when used with what the camera mic picks up is more than acceptable for wedding, party, etc videos.
Eric
“I push the RECORD button and hope for the best”
-
Eric Toline
July 3, 2014 at 4:33 pm in reply to: Video Broadcast friendly digital audio mixer (For master control room)The new Behringer x32 series or Soundcraft Expression digital boards might be what you’re looking for. Both around $2500 or so.
Eric
“I push the RECORD button and hope for the best”
-
Tape a wireless TX & mic to a PA speaker set the level and be done with it in those instances.
Eric
“I push the RECORD button and hope for the best”
-
I would suggest that you try other sources both mic and line level to see if you get the same results. Also try the Rode mic into another mixer/recorder just to eliminate any problem with it.
Eric
“I push the RECORD button and hope for the best”
-
The real question is why would you need anything hotter than -6dbfs? If you really want/need the tracks to be hotter then boost them in post.
Eric
“I push the RECORD button and hope for the best”
-
Eric Toline
June 19, 2014 at 6:41 pm in reply to: Which mic for static mic stand and slightly moving subject?Put the guitar case on a high stool or small table. Problem solved.
Eric
“I push the RECORD button and hope for the best”
-
For your use the H2N will work just fine. I know many event videographers who use the same format with no problems. OTOH they all use the cheapest lav they can find with acceptable results. You might want to check Radio Shack for low priced lav mics.
Eric
“I push the RECORD button and hope for the best”
-
If I might suggest posting to a forum with more SD users who would have more experience with the 552. https://www.jwsoundgroup.net.
Eric
“I push the RECORD button and hope for the best”