Forum Replies Created

Page 19 of 126
  • There is a tutorial for exactly this on the VASST site.

    Make a second copy of the event.
    Apply a Bezier mask on the top layer set to pass only the singer.
    Put the levels tool on the lower layer. Notice the changes as you adjust the levels tool.
    You’ll prolly need to feather the bezier mask, so make it smaller than you intitially will feel it needs to be.

    Douglas Spotted Eagle
    VASST

    Certified Sony Vegas Trainer
    Aerial Camera/Instructor

  • We capture HDSDI from Vegas sourced from XDCAM and EX both. It’s more and more rare for capture these days, mostly monitoring. Even then…we’re a closed house, so SDI is no longer the “big deal” for us that it was. I’m more interested in seeing HDMI ingest/output working.

    Douglas Spotted Eagle
    VASST

    Certified Sony Vegas Trainer
    Aerial Camera/Instructor

  • Douglas Spotted eagle

    January 27, 2010 at 10:50 pm in reply to: panasonic varicam

    Short answer…yep.

    The answer to your question is best found in Raylight

    Douglas Spotted Eagle
    VASST

    Certified Sony Vegas Trainer
    Aerial Camera/Instructor

  • Been using the Xena for a coupla years. Other than some hiccups during beta cycles…life is good.

    Douglas Spotted Eagle
    VASST

    Certified Sony Vegas Trainer
    Aerial Camera/Instructor

  • Douglas Spotted eagle

    January 18, 2010 at 10:30 pm in reply to: Can MPEG4 H.264 be Imported?

    Import is as simple as importing any other video format. Just drop er’ on the timeline.

    Douglas Spotted Eagle
    VASST

    Certified Sony Vegas Trainer
    Aerial Camera/Instructor

  • Douglas Spotted eagle

    January 4, 2010 at 1:48 am in reply to: Audio Bus B also appears on A

    Can you create a new bus, send the voice to the new bus, and then clear it from the previous bus assignment?

    Douglas Spotted Eagle
    VASST

    Certified Sony Vegas Trainer
    Aerial Camera/Instructor

  • Douglas Spotted eagle

    January 4, 2010 at 1:34 am in reply to: Bizarre error – WMV 3 Mbps

    You “lose” the keys, or they just aren’t accurate?
    One small trick if you need multiple destinations from the same timeline, is to create a high-grade master such as an XDCAM master. Then you’re sourcing from an assembly.

    Douglas Spotted Eagle
    VASST

    Certified Sony Vegas Trainer
    Aerial Camera/Instructor

  • Douglas Spotted eagle

    January 4, 2010 at 1:32 am in reply to: ACVHD Lite export flickers really bad

    I suspect you’ll find the same problem with the Handbrake export. If you want to send me a small chunk, I’ll put it into Handbrake…
    AVCHD Lite is a serious PITA, some of the sports folks are using it on the little cams too, and it’s problematic for Premiere, Ulead Movie too.

    Douglas Spotted Eagle
    VASST

    Certified Sony Vegas Trainer
    Aerial Camera/Instructor

  • Douglas Spotted eagle

    November 24, 2009 at 5:07 am in reply to: DV 16:9 Project to DV tape in 16:9?

    Be sure you’re using the DV print to tape device and not the HDV print to tape too. They’re different.

    Additionally, make sure you’ve got the deck set to receive in DV, not AUTO mode. It’ll throw Vegas.

    Douglas Spotted Eagle
    VASST

    Certified Sony Vegas Trainer
    Aerial Camera/Instructor

  • Douglas Spotted eagle

    November 24, 2009 at 5:05 am in reply to: HVX200/.mov/Vegas 9 headache!

    Once FCP screws up the file, it’s a bear to get anything to read it.
    Two options;
    A-convert the files to ProRes and install the ProRes codec on your Windows machine.
    B-Convert the files to .mxf format, you’ll need the free Sony plug for FCP from https://www.sony.com/xdcam
    And then you’ll be stylin.
    IMO, .mxf is the best format to use for conversion.

    Douglas Spotted Eagle
    VASST

    Certified Sony Vegas Trainer
    Aerial Camera/Instructor

Page 19 of 126

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy