Forum Replies Created

Page 14 of 18
  • Del Chapple

    February 8, 2008 at 1:37 am in reply to: Black Magic RGB to AJA RGB

    can you copy and paste the time code track like you can with audio..? i’m going to try right now..

    del

    you cant hear my inner voice scream… can you..?

  • Del Chapple

    February 8, 2008 at 1:16 am in reply to: Setup New MacPro with Default RAM or OWC Purchased RAM?

    i’d get every thing loaded on the stock ram make sure it runs fine for a couple days then swap it out. then if it act’s like an insane gf put the stock back in.. Remember the tempermental G5 ram issue, i might just be paranoid..

    del

    you cant hear my inner voice scream… can you..?

  • Del Chapple

    February 8, 2008 at 12:33 am in reply to: Bob Z could you help one more time

    I wish it was that easy, i know beta and smpte level. I tested the yrb A to d straight into a BVW75, D-Beta and the Multibridge will not send proper signal out the yrb A to D in ntsc, but pal is fine. I’ve tried a few MB’s and all the software versions and still no worky.. Maybe they fixed it on the extreme??

    d

    you cant hear my inner voice scream… can you..?

  • Del Chapple

    February 6, 2008 at 8:31 pm in reply to: Beta SP to FCP

    Yes!! Listen to walter!! DV is highly compressed and the canopus box is composite!! Listen to walter!!

    del

    you cant hear my inner voice scream… can you..?

  • Del Chapple

    February 6, 2008 at 8:27 pm in reply to: DVCPRO 1080i50

    Make sure your deck Freq is 50/25. the capture card will not lock to the deck even if the Freq is off a little. If you can validate whats actually coming out of the deck via scope. Progressive is always better than interlace IMHO, its a trade off 720 has more vertical rez and 1080 has more horizantal rez.

    del

    you cant hear my inner voice scream… can you..?

  • Del Chapple

    February 6, 2008 at 8:19 pm in reply to: Beta SP to FCP

    I’d go with AJA, Blackmagic still has not fixed the NTSC Component A to D side of theit multibridge so i’d assume the decklink has the same problem.. PAL is fine though..

    del

    you cant hear my inner voice scream… can you..?

  • Del Chapple

    February 6, 2008 at 8:06 pm in reply to: MPEG IMX format

    if you can play the file in QT then you should be able to Export from QT directly..

    i’d hope

    d

    you cant hear my inner voice scream… can you..?

  • Del Chapple

    February 6, 2008 at 4:16 pm in reply to: MPEG IMX format

    it should work.. make a copy of the file and change the extention to (.mov). this might work and it might eat your file..

    del

    you cant hear my inner voice scream… can you..?

  • Del Chapple

    February 6, 2008 at 3:24 pm in reply to: Bob Z could you help one more time

    fyi, not sure if blackmagic ever fixed this problem they havent with the multibridge yet. the D to A component analog side works as expected but the A to D side still has problems, you’ll never get a proper setup on the output.

    del

    you cant hear my inner voice scream… can you..?

  • Del Chapple

    February 5, 2008 at 12:12 am in reply to: Bob Z could you help one more time

    the aja’s are between 600-9oo$, but they are professional grade, so is the price…

    del

    you cant hear my inner voice scream… can you..?

Page 14 of 18

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy