David Smith
Forum Replies Created
-
darn, I thought that was the special filter for removing the blimp a sound recordist dips into the shot.
-
Thanks Ron, very informative post.
Regards,
David -
Anyone know of a plug in for removing large chips off shoulders?
-
[Andy Taplin] ” here’s a really comprehensive article from a tester here in the UK:-
” target=”_blank”>https://www.dvuser.co.uk/content.php?CID=144″
I must say that while this looks like a very interesting format, the tone of this article is just too full of over the top cheerleading. Some examples:
“Using XDCAM HD during the acquisition stage of a production is pure bliss…….. When you first put a blank disc into an XDCAM HD camcorder, there is a short delay whilst the disc is formatted. I found this was over in hardly any time at all; around 15 seconds, it wouldn
-
Jamie,
Go to the View menu in Final Cut. Choose External Video (near the bottom) and make sure it’s set to All Frames. FCP has a nasty habit of resetting that menu to Off when you change A/V settings.
-
Jon,
How are you monitoring this stuff, both audio and video? When you turn on the timecode overlay, does it report the audio and video to be in sync?
-
Jeremy,
My RS-422 device control works fine with a UVW-1800 and Quicktime 7.1.3, however my system uses device control via a Kona LH card and not a serial adaptor like you have. If it’s any help, near the bottom of the following linked page is a link to reinstall 6.5 from 7:
https://www.simnet.is/klipklap/quicktime/Regards,
David -
I’ll test my 1800 tomorrow and get back to you. I upgraded to 7.1.3 and haven’t used the RS-422 since, but I haven’t heard any grumblings about the QT upgrade either.
Can you test the computer with another deck or the deck with another 422 controller?
Regards,
David -
Sorry, I have to ask…. you checked the remote switch on the 1800? Reseated the cables?
-
[Sulaman Hameed] “3 or 4 sec. clip then outside the Capture Window…”
Sulaman,
Are you saying your G5 captures for 3 or 4 seconds and then stops capturing?
Does this happen every time?
Can you give other details like:
Are you using Firewire?
What kind of drive are you capturing to?I think people will need more details in order to make suggestions to help solve your problem.
Regards,
David