Forum Replies Created
-
Hi,
Yes, the Io HD will work as a stand-alone 10-bit up/down/cross and A/D converter!
—
AJA Video Systems
+1 (530) 274-2048 Intl.
(800) 251-4224 US
sales@aja.com -
Hi Walter,
The Hi5 goes in the other direction; SDI to HDMI, for monitoring purposes, etc.
Thanks for the good feedback, though!
—
AJA Video Systems
+1 (530) 274-2048 Intl.
(800) 251-4224 US
sales@aja.com -
Hi,
The GEN10 is scheduled to ship worldwide near the end of June.
—
AJA Video Systems
+1 (530) 274-2048 Intl.
(800) 251-4224 US
sales@aja.com -
Aja Sales department
April 17, 2007 at 7:47 am in reply to: *NEW Io HD…The Next Big Thing from AJA!*Hi,
The Io HD is the only device in the world to support the Apple ProRes 422 codec in hardware.
This is the culmination of another joint engineering project between Apple and AJA. The Io HD therefore can support full 10-bit 4:2:2 full-raster HD over Firewire 800!
—
AJA Video Systems
+1 (530) 274-2048 Intl.
(800) 251-4224 US
sales@aja.com -
$390 US MSRP 🙂
https://www.aja.com/html/products_converters_GEN10.html
—
AJA Video Systems
+1 (530) 274-2048 Intl.
(800) 251-4224 US
sales@aja.com -
Hi,
Please check Apple webpage again, and you will see the KONA 3, KONA 3X, KONA 2, KONA LS, and KONA LHe are all qualified for FCP 5.1.x.
https://www.apple.com/finalcutstudio/resources/devicelist.php
Thank you,
—
AJA Video Systems
+1 (530) 274-2048 Intl.
(800) 251-4224 US
sales@aja.com -
Aja Sales department
April 16, 2007 at 6:38 am in reply to: *NEW Io HD…The Next Big Thing from AJA!*Hi,
Io HD also supports SD uncompressed, 8-bit and 10-bit, as well as DV25 and DV50 in Final Cut Studio. Basically, it’s ProRes 422 for HD, and then in SD it supports everything the original Io does!
—
AJA Video Systems
+1 (530) 274-2048 Intl.
(800) 251-4224 US
sales@aja.com -
-
Aja Sales department
April 16, 2007 at 2:47 am in reply to: *NEW Io HD…The Next Big Thing from AJA!*Hello,
Apple ProRes 422 is supported in the same way as other supported codecs in FCP, like DVCPRO-HD…KONA 3, etc. can write to directly to it, and and of course play it back.
Stay tuned, it’s gonna be a fun show!
Thank you,
—
AJA Video Systems
+1 (530) 274-2048 Intl.
(800) 251-4224 US
sales@aja.com -
Aja Sales department
April 6, 2007 at 4:09 pm in reply to: Why am I power cycling my AJA I/O 2-3 times a month?????Hi Dan,
To answer your question, the Io does occasionally need power cycling such as you are experiencing. A PCI card, like a KONA or your BM’s, basically get hardware “refreshed” and reset every time there is a computer restart, shutdown, etc. Because the Io is an external device, this does not occur during a computer restart.
If you feel the amount of issues you are experiencing with the Io’s are out of the ordinary, please feel free to call or email our support group, who will be more than happy to go over any issues with you and find solutions as needed.
support@aja.com
(530) 271-3190 supportAlso, I see you’re based in Las Vegas, so please stop by our booth at NAB…we’re on the aisle, right across from Apple, at booth number SL6113 in the South Hall.
Thank you,
—
AJA Video Systems
+1 (530) 274-2048 Intl.
(800) 251-4224 US
sales@aja.com