Replies – Forums – Vince Becquiot – Page 91

Forum Replies Created

Page 91 of 427

← 1 … 90 91 92 … 427 →

Vince Becquiot
March 1, 2011 at 7:51 pm in reply to: slow playing slow shortcuts

Hi Tielman,

What type of footage, drives are you working with?

Vince Becquiot

Kaptis Studios
San Francisco – Bay Area
Vince Becquiot
March 1, 2011 at 12:36 am in reply to: cutting audio with Video

Your tracks may have gotten unlinked, or they were from separate footage. Holding the Ctrl key, select both audio and video part of the cip, then select “link”, if that’s not available, use “group’.

Vince Becquiot

Kaptis Studios
San Francisco – Bay Area
Vince Becquiot
February 28, 2011 at 8:35 pm in reply to: It Thinks My Video is Shorter Than It Actually Is

Hi James,

This is actually not that uncommon. It depends on how the DVD was encoded. One solution is to get a copy of an Mpeg converter. I like Tmpgenc’s Video Master Works, they have a DVD conversion wizard that pretty much achieves a perfect conversion to uncompressed in a couple of clicks. You could also try bringing them directly into Adobe Media Encoder, or After effects and see if you have better luck.

Vince Becquiot

Kaptis Studios
San Francisco – Bay Area
Vince Becquiot
February 28, 2011 at 7:22 pm in reply to: Adobe Premiere Pro CS5 on network accounts?

Hi Dave,

Have you tried setting the scratch disks to a local folder instead?

This sure sounds like a permission issue with the limited accounts (Read only)

Vince Becquiot

Kaptis Studios
San Francisco – Bay Area
Vince Becquiot
February 28, 2011 at 6:36 pm in reply to: Big Project Takes FOREVER To Load

Hi Kobi,

When you are working with a good machine, this type of issue can usually be traced to drives.

For this type of project, you’ll need a solid drive array that can pull a huge amount of data through. These days, I would recommend a RAID 10, all you have to do is look at ads on the Cow, most are good quality vendors.

Vince Becquiot

Kaptis Studios
San Francisco – Bay Area
Vince Becquiot
February 26, 2011 at 9:44 pm in reply to: Retention of dissolves.

Hi Bret,

If you apply a cross dissolve between 2 clips and remove one of the clips, the effects will go away, that makes sense to me.

If you apply the dissolve to a single clip (you will need to have a gap between the clips), you can them move the clip freely and the dissolve will stay there.

Vince Becquiot

Kaptis Studios
San Francisco – Bay Area
Vince Becquiot
February 23, 2011 at 5:38 pm in reply to: Text/PSD imports always result in Aliasing

Hi Jason,

What are your export settings, can you post a screen shot?

Vince Becquiot

Kaptis Studios
San Francisco – Bay Area
Vince Becquiot
February 22, 2011 at 9:26 pm in reply to: Premiere Pro CS4 Sequence and Export Settings

Hi Nathanael,

Well, HDV is 1440×1080 (it does use square pixels). But you can choose 1920 x 1080 as your export as long as you pick square pixels (PAR 1).

What format are exporting to?

Vince Becquiot

Kaptis Studios
San Francisco – Bay Area
Vince Becquiot
February 22, 2011 at 9:22 pm in reply to: Emergency problem! Wrong frame rates … 29.97 -> 23.976

BTW, I missed the 80% slow down part, do you mean 20%, or are you slowing down the footage further?

Vince Becquiot

Kaptis Studios
San Francisco – Bay Area
Vince Becquiot
February 22, 2011 at 9:19 pm in reply to: Emergency problem! Wrong frame rates … 29.97 -> 23.976

Hi Kris,

Unfortunately, it’s not that simple, frames that are removed are creating that jitter. You’ll probably want to avoid 24p anyway, it has always been a bit of a gimmick anyway, it does not create a film look…

But I’ll get right to the answer.

Create a new 29.97 sequence, with the same number of video and audio (mono/stereo) tracks, then copy and paste the clips from your previous sequence to the new one. Re-interpret all your footage at 29.97, you should be good to go.

Vince Becquiot

Kaptis Studios
San Francisco – Bay Area

Page 91 of 427

← 1 … 90 91 92 … 427 →