Vince Becquiot
Forum Replies Created
-
Hi Joe,
Not in one shot. You can use the Ctrl+D shortcut and use Page Down to go to the next edit point.
Should get you there pretty quick.
Vince
Vince Becquiot
Kaptis Studios
San Francisco – Bay Area -
For Edison/XLR and the long stuff, we use 2″x2′ aluminum pipes with end plates and screwed them into a piece of plywood that’s itself screwed into the wall. That frees up a lot of space and never had one break.
Vince Becquiot
Kaptis Studios
San Francisco – Bay Area -
Hi Devon,
You text will not look crisp unless you choose 100% in your viewer (lower left of your preview panel).
FCP is very picky about Pixel Aspect Ratios, and unlike Premiere, you have to match the PAR of the sequence you are working with. Try square pixels first if you are not sure. Otherwise, let us know about the sequence you are working with.
Vince Becquiot
Kaptis Studios
San Francisco – Bay Area -
You may also have to check your OS preferences and change the audio output there.
Vince Becquiot
Kaptis Studios
San Francisco – Bay Area -
Hi Shane,
It could be hard to diagnose without looking at the size of your projects or the type of footage you are working with. You haven’t mentioned drives, and that’s often a big reason for slowdowns. A solid 4 drive RAID 5 enclosure is what I would use at a minimum with Premiere nowadays if you are working on a sizable project.
Your CPU may also be on the edge, have you looked at your system performance panel while editing?
RAM and graphics should be just fine for most Premiere tasks.
If could also be worth looking at a small SDD drive to run your OS if you want a snappier interface.
Again, my 2 guesses in order would be drive and CPU.
Vince Becquiot
Kaptis Studios
San Francisco – Bay Area -
So it is setup as extended correct? As an alternative, you can always drag your program monitor window to the other display to get a pseudo full screen.
Vince Becquiot
Kaptis Studios
San Francisco – Bay Area -
Hi Tero,
If I remember well, HP has a weird way of routing its HDMI output that Premiere my not detect. At least it was the case with the DV 9000 series. If your monitor is set as extended (important), also make sure you restart Premiere after you set up the monitor.
Otherwise, it’s likely an HP issue (like many others, sorry personal grudge 🙂
Vince Becquiot
Kaptis Studios
San Francisco – Bay Area -
Hi Puneet,
When you bring the footage in Premiere, it should be interpreted correctly, except in rare cases.
You can right click and choose Modify > Interpret footage. That will tell you what Premiere picked.
You can also drag the file into the new item icon (second icon from the right at the bottom of your project panel). That will create a new sequence based on your footage.
Vince Becquiot
Kaptis Studios
San Francisco – Bay Area -
Hi David,
On your export panel, choose either 648×480 (4:3) or 854×480(16:9), square pixels.
Vince Becquiot
Kaptis Studios
San Francisco – Bay Area -
You should absolutely have no issue playing AVCHD without rendering in Premiere.
If you do, there likely is a bottleneck in your system, most likely the graphics card.
It will definitely not play on integrated cards. If you list your system specs, we can try to figure out where the issue is.
Vince Becquiot
Kaptis Studios
San Francisco – Bay Area