Russell Lasson
Forum Replies Created
-
What do you mean by flicker? Do you have any more info like what frame rate you shot, how you digitized it, etc?
-Russ
-
If you disconnect everything (firewire drives/P2 adapter) does it work?
Have you ever had it working?
You could double check your settings by using the easy setup. You could also try to delete your preferences.
Good luck!
-Russ
-
I agree. I was secretly hoping that AJA and Apple had worked things out and that we’d see Color 1.0.2 come out.
But alas, not yet.
-Russ
-
hmmmm………..
-Russ
-
Just realized I posted in the Kona forum and not the IO forum. Silly me. It’s mostly the same readers so what do you think?
-Russ
-
[Jay Kelley] “I know I can use external TC out of the camera IF I turn off SLTC on the 1400 but then risk losing the frame flag information embedded in the userbits. “
I don’t know of anyway to clone a tape and maintain the flags. That’s not what you wanted to hear. Hopefully someone else knows.
Good luck with it!
-Russ
-
You could digitize it two ways:
– 60fps (24P with a 60P 2:3 pulldown) This is the exact info on the tape.
– 24fps (removing the 2:3 pulldown so you end up with a native 23.98 file)Easiest thing to do is select Easy Setup – DVCPROHD 720P24 for 23.98 or DVCPROHD 720P60 if you want to keep all 60 frames. These will have all of the right settings.
-Russ
-
I would say it depends on what assets you’re using. If you’re just using so pictures and DV video, it probably wouldn’t buy you a whole lot unless you’re using a lot of pictures and videos.
If you’re using uncompressed video, then definitely put it on the raid.
In any point, it wouldn’t hurt to always put it on the raid. (just be sure you have a backup)
-Russ
-
The ATI X1900 XT is generally considered to be the best card for the money/performance. Check out barefeats.com for some comparisons.
-Russ
-
Man, that’s strange. I don’t know of anything that would cause that.
You might try deleting the FCP preferences.
Sometimes I have a similar problem where one of our systems won’t see the video in Log and Capture. Usually just restarting FCP fixes it.
Good luck!
-Russ