Ruslan Akmanov
Forum Replies Created
-
I have issue with Dual Link output with 7.5.1 version& I wrote letter to AJA Support but don’t have any answers for now. NAB still going . . .
best regards
ruslan_3d -
Next Adds
Spaces work. MAIN problem is HOW MANY SYMBOLS are used in disk name. If You get this errors try to cut name of the disk to shorter one . . .best regards
ruslan_3d -
Hi Aaron
Where do You see purple picture? On FCP Capture screen or on Connected to AJA control monitor?best regards
ruslan_3d -
Hi Juha
It’s hard to find ready system, but I have big experience with Mac Edit stations. I’m from Azerbaijan but I can try to help You via Internet. Write to my e-mail if You want and we will continue . . .best regards
ruslan_3d -
Hi Marc
VTR Exchange most work fine. Check AJA Pref Panel: Inputs must be “Dual Link”. Then VTR Exchange: Compressor “AJA 10-bit RGB”, Source “1080i25 10 bit” (1080p25 may be will work, but this is not important – F-21 will provide You Progressive source). Kona Pref Panel must still show for You “YUV-10b” mode, but when You will press “Capture” or etc Panel must switch to “RGB 10b” immediately . . .best regards
ruslan_3d -
My adds to Bob Zelin message.
We used MacPro 2007 with AJA Kona 3 in slot 3 and Apple 4GB 4Channel or ATTO FC-44ES (less stable) in slot 4. Both lines in x4 mode. We got about 570MB/s Write and 620MB/s Read. Up to 2K playback on Kona3.
Now we migrated to last MacPro 3.2 and I put Kona 3 to clot 3 (x4) and ATTO FC-44ES in slot 2 (x16). We got about 810MB/s Write and 710MB/s Read! Kona 3 work fine up to 1080p 25 RGB Dual Link (2K not tested yet). All things is stable and looks fine. Will continue testing for now.best regards
ruslan_3d -
Hi Wayne,
We use Apple 4Gb 4 port Apple FC board and 2 Ciprico MediaVault 4210 units. All system work fine with about 600MB/s Read/Write. We had ATTO Cerenity FC44ES, but it have some troubles with 1st gen MacPro.MacPro 2×3.0GHz/4GB/ATI 1900XT/Aja Kona 3/ Apple 4Gb 4 port FC board/2xCiprico MediaVault 4210/JL Cooper MCS-300
OS X 10.5.4/QuickTime 7.5/Kona 3 v5.1NDD/FC Studio 2 (last updates)Hope this info will help You . . .
best regards
ruslan_3d -
Hi Arthur,
I had same problems with 2K playback on 10.5.2 system. Then I upgrade to 10.5.3 and all things fine. I can playback 2.5 minutes of 2K in 25fps7 May be You have problems due to You play video from system drive? If You use 1 big RAID with 6 drives for system and video. May be You need Kona 3 5.1 NDD driver? Or may be You need to check preferences for sleep or etc.
best regards
ruslan_3d -
Hi Arthur,
I had same problems with 2K playback on 10.5.2 system. Then I upgrade to 10.5.3 and all things fine. I can playback 2.5 minutes of 2K in 25fps7 May be You have problems due to You play video from system drive? If You use 1 big RAID with 6 drives for system and video. May be You need Kona 3 5.1 NDD driver? Or may be You need to check preferences for sleep or etc.
best regards
ruslan_3d -
This is very strange situation.
You need to know which of formats used for codecs. Final Cut Pro can’t work in RealTime with 4:4:4 RGB format. Only 4:2:2 for now. We have very stable system with Kona3 and MacPro (early 2007 Year) with Ciprico RAID. It is solid and can do fades^ speed changes and basic color correction in RealTime with 4:2:2 sources . . .best regards
ruslan_3d