Forum Replies Created

Page 59 of 84
  • Rennie Klymyk

    December 5, 2006 at 6:29 pm in reply to: Creating a Closed Caption Sub-Master Tape

    Thanks for your help, I’m with clients all day so will check these out later. Basically someone needed to borrow a deck to record from their encoder as “their decks wouldn’t do it”. I questioned the logic behind this as from my understanding from about lines 18 -28 ntsc has reserved for these types of data, line 21 being CC. I’ve never needed to work with them but have seen on the waveform and been aware they are there and I ASSUMED any deck could record or play as they are part of the ntsc signal. What would my aj-d750 have that their 650 or 640 doesn’t have or their uvw-1800; D-9; DSR-80? All these I would think should work but then I don’t know everything either.

    “everything is broken”

  • [RChaney942] “*Are there any magic button combinations to use to force ejection or ?”

    Can you display the data on a monitor to see if there is an error code? I don’t have a service manual for a dsr11 but if there is a “magic way out” you need the error code. Then maybe google it for the “how to”

  • Rennie Klymyk

    December 4, 2006 at 7:02 pm in reply to: Connecting composite monitor to FCP with AJA

    It’s probably better for the capacitors to keep the deck on than have sitting with no power for long periods. Drum (heads), threading (load mech) and tape reel motors are the things that you have to worry about.

  • Rennie Klymyk

    December 4, 2006 at 5:05 pm in reply to: separating m/e tracks in fcp 5 for dvd sp

    [boco0077] ” I need to get the movie ready for burning into dvd sp 5.”

    How did you get DVDSP 5?…..(you don’t have to answer that, DVDSP 4 is current)

    [boco0077] “do I need to import dialog tracks into compressor, then music and effects, then lay them both into dvd sp? How?”

    Any tracks that are selectable options in the dvd should be seperate encodes.

    Alternate video tracks (angles) and different language or comentary tracks can be copy and pasted to a new sequence, nested or mixed down and exported using compressor.

    Different language or comentary tracks will likely share the same music back grounds but will need to be mixed down seperately so they are complete stand alone tracks.

  • Rennie Klymyk

    December 4, 2006 at 4:11 pm in reply to: Best sequence preset for still picture edit

    Try uncompressed 8 bit at 23.98, I’ve had excellent results. Offline rt photo jpeg should work well also but I’ve yet to try it.

  • Rennie Klymyk

    December 2, 2006 at 3:25 am in reply to: Capturing footage shot in LP mode

    [bxdigital] “Im using a G5, FCP 5.1.1, Sony DSR-20/Canon XL1.”

    None of these devices handle the LP recording speed. They do mini dv and/or dvcam but not LP. You need to borrow a consumer camera or the little clam shell deck for mini dv (something 900 and 300). We have a photo shop in our tourist area here who rents these handycams to tourists. You can probably find one in your area too.

  • Thanks everyone! I just told my client a few hours ago “not going to happen” for a job we want to wrap tomorrow. She will be surprised in the morning!

  • Rennie Klymyk

    December 2, 2006 at 2:35 am in reply to: AJA IO and HDP
  • Rennie Klymyk

    December 2, 2006 at 2:23 am in reply to: CRT 16×9 Question

    Yes that monitor has a 16:9 setting. It is an old monitor but if the picture is good and the price is right, go for it.

  • Rennie Klymyk

    December 1, 2006 at 4:42 am in reply to: Power Conditioner

    [Bob Cole] “a very expensive unit which reconstitutes the power from AC-DC-AC and eats up lots of energy in the process. “

    http://www.equitech.com

    I think they sell these by the pound, they are full of copper windings and weigh a ton! It’s a very interesting concept, read on.

    “everything is broken”

Page 59 of 84

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy