[Rcpics]

https://developer.apple.com/documentation/AppleApplications/Reference/FinalCutPro_XML/Documents/chapter_2_section_2.html

https://www.kenstone.net/fcp_homepage/xml_hodgetts.html

These should give you a pretty good idea.

[Rcpics]

Have you tried exporting an XML of the edit and opening the XML on the other system?

[Rcpics]

Responded.

[Rcpics]

I’ve updated on both my G5 and MacPro, and everything works fine…FCP, Pro Tools, etc. Make sure you go to the Apple site under Support – Downloads, and download the ‘Combo Updater’ for your computer and follow the steps manually. Don’t use your computer’s ‘Software Update’ function…that’s where some have run into problems.

[Rcpics]

Is that ProMax a hardware or software RAID? Looks like the latter, seeing that it has two eSATA ports on the back.

[Rcpics]

2 Gigs bare minimum…4 should be comfortable.

[Rcpics]

Shouldn’t everyone have upgraded to FCP 5.1.4 by now? I know that 5.1.3 was out for something like three days before they ‘fixed’ it with 4. I’m still waiting to go to 10.4.9 until I’ve seen more feedback.

[Rcpics]

If using the MXO with FCP…and you use your computer’s mini-plug audio out for sound..

A. The included MXO’s mini-plug (on the connector cable) into the computer’s audio out mini-plug jack. The MXO’s mini-plug jack (on the connector cable) to your audio…likely a mini-plug to L/R RCA adapter…stereo RCA to 1/4″ plug adapters or cables into one of the mixer’s stereo line-in’s, which should accept either balanced or unbalanced (un-, in your case). Or use the mixer’s RCA TAPE/2 TK inputs. Let’s call this channel A.

B. The RCA L/R out’s on the MXO box to another stereo channel on the mixer or the TAPE IN like above. Call it channel B.

In the MXO’s ‘Presentation Mode’, which just passes through your second monitor’s extended desktop display mode to both your second monitor and an additional component/composite/s-video display, the sound should be coming through the mini-plug hookup, like you would normally do….if that’s your ‘default’ sound output on your computer. That’ll be channel A.

When using the MXO’s ‘Mastering Mode’, where the MXO is outputting your FCP video fullscreen/scaled to both your second computer monitor and your other component/composite/s-video display, the sound should be through the channel B hookup, which is supposed to be in perfect sync with the fullscreen/scaled video that’s displaying out of the box.

So you’ll need two available stereo channels on your mixer…or one fader channel and the stereo TAPE/2 TK in.

[Rcpics]

“HELP!!!!!!! So I’m in the middle of this very important project with a deadline looming and I just upgraded my system ’cause my software update said I should and now nothing is working right, I cant open FCP, all my files are…are….ahhhh just kidding:)”

What’s funny is that that’s really not funny.

😉

[Rcpics]

Try various flicker filters in both FCP and After effects…maybe need to soften them a slight amount.