Nigel O'neill
Forum Replies Created
-
Kelly
I have had similar issues of media ‘swapping out’, but with video and audio, always in the same place, always with the same footage. It has happened a couple of times on 1 wedding but with entirely separate projects although both use nested vegs, but both use different source media. e.g. whilst the bride is getting ready, and then I nest the veg file to create a highlights project. The bridge getting ready ‘project’ is OK, but the highlights project has the gremlins. Am I making sense?
My workaround was to edit and render the project without restarting the project. I rendered the same project with ambient audio plus another with the audio overlay added, so if I had to make changes, I was not starting all over again.
Are you nesting vegs? If so, we might be onto something… .
Intel i7 920, 12GB RAM, ASUS P6T, Vegas Pro 10 (x32/x64), Windows 7 x64 Ultimate, Vegas Production Assistant 1.0, VASST Ultimate S Pro 4.1, Neat Video Pro 2.6
-
Jay, what is your source footage? You don’t want to end up stretching or cropping footage, which typically happens when going from a 4:3 source to 16:9.
Ideally, your input source should match your output dimensionally.
Intel i7 920, 12GB RAM, ASUS P6T, Vegas Pro 10 (x32/x64), Windows 7 x64 Ultimate, Vegas Production Assistant 1.0, VASST Ultimate S Pro 4.1, Neat Video Pro 2.6
-
Can’t see I have experienced this particular problem on either the 32 bit or 64 bit SVP10. Have you tried defaulting Vegas?
Hold down CTRL-SHIFT whilst starting Vegas.
Intel i7 920, 12GB RAM, ASUS P6T, Vegas Pro 10 (x32/x64), Windows 7 x64 Ultimate, Vegas Production Assistant 1.0, VASST Ultimate S Pro 4.1, Neat Video Pro 2.6
-
It’s curious that the big fan worked for the laptop too… .
Intel i7 920, 12GB RAM, ASUS P6T, Vegas Pro 10 (x32/x64), Windows 7 x64 Ultimate, Vegas Production Assistant 1.0, VASST Ultimate S Pro 4.1, Neat Video Pro 2.6
-
I’ve rendered a 6 minute promo video down to a 6 mb WMV file and it looks good on a web site, but as Douglas says, what is your output target and who is your audience?
Intel i7 920, 12GB RAM, ASUS P6T, Vegas Pro 10 (x32/x64), Windows 7 x64 Ultimate, Vegas Production Assistant 1.0, VASST Ultimate S Pro 4.1, Neat Video Pro 2.6
-
A classic case of a work man blaming his tools 🙂
Intel i7 920, 12GB RAM, ASUS P6T, Vegas Pro 10 (x32/x64), Windows 7 x64 Ultimate, Vegas Production Assistant 1.0, VASST Ultimate S Pro 4.1, Neat Video Pro 2.6
-
This PC will edit HDV or AVCHD:
Quad Core i7 series 2 eg. i7 2500K CPU. It makes previews in Vegas much smoother.
LGA 1155 motherboard from Intel or ASUS
Windows 7, 64 bit version
12 to 16 GB RAM
2 x SATA II HDD – 320 GB for C: drive, 1 x 1500 GB for F: drive
Nvidia GT470 or GT480 video card (this is a must for Vegas). ATI cards are no use.
DVD burner (or bluray if you want HD)
Support for USB 2.0 and USB 3.0 ports
I would recommend an 850W power supply
1394 firewire card if you intend to capture from tape some day
Sony Vegas Pro 9 will edit AVCHD, but if you want maximum compatibility, go to SVP 10. You can install both the 32 bit and 64 bit editions.
Intel i7 920, 12GB RAM, ASUS P6T, Vegas Pro 10 (x32/x64), Windows 7 x64 Ultimate, Vegas Production Assistant 1.0, VASST Ultimate S Pro 4.1, Neat Video Pro 2.6
-
I have not had any issues with MXF files and HDV for single track editing, but using Vasst Ultimate S 4.1 with Quadcam enabled and using the same files really drops the preview rate down, even on my grunty i7 system. I typically have to preview/edit in Draft most of the time.
Anything that will boost the preview will help!
Intel i7 920, 12GB RAM, ASUS P6T, Vegas Pro 10 (x32/x64), Windows 7 x64 Ultimate, Vegas Production Assistant 1.0, VASST Ultimate S Pro 4.1, Neat Video Pro 2.6
-
The camera detection issue could be a firewall or operating system problem. What firewall and operating system are you running?
Intel i7 920, 12GB RAM, ASUS P6T, Vegas Pro 10 (x32/x64), Windows 7 x64 Ultimate, Vegas Production Assistant 1.0, VASST Ultimate S Pro 4.1, Neat Video Pro 2.6
-
It sounds like a CPU cooling policy issue on the laptop, and a dust bunny issue for the PC.
Laptop
If you are running on a laptop and are using Windows 7, the default cooling policy is ‘passive’. I had this issue with my Acer laptop that kept on shutting down during renders. Once I changed it to ‘Active’ it was fine, but it does mean the laptop consumes more battery power. But, it renders!
If this is the case, “System cooling policy” is a power setting item for Processor under the Power options of Windows 7 -> change plan setting -> advanced power setting -> Processor power management.
PC
Rendering the with the side panel off and a big electric fan usually works.
Just out of curiosity, are your CPU’s Intel or AMD?
Intel i7 920, 12GB RAM, ASUS P6T, Vegas Pro 10 (x32/x64), Windows 7 x64 Ultimate, Vegas Production Assistant 1.0, VASST Ultimate S Pro 4.1, Neat Video Pro 2.6