Mike Schrengohst
Forum Replies Created
-
Funny that you mentioned that!
We are uploading a sample clip now.
Will be available as DVCPRO HD
and PhotoJpeg QT’s
Should be active by tomorrow.Mike Schrengohst
http://www.MotionZoneHD.com -
I saw a post from Jan about fixing corrupt files?
See if there is a menu option in the P2 mode for that?Mike Schrengohst
http://www.MotionZoneHD.com -
If you cannot play the clip in the camera then that clip must have a problem.
Of course you have powered down, removed the battery. Re-attach battery, power-up and checked again? Try recording a normal clip and see if you can play back. And of course you have the camera set to 720p 30p???Mike Schrengohst
http://www.MotionZoneHD.com -
Yes you should be able to play the clip back directly. Just make sure you are in 720 30p for playback. What were your interval settings?
Mike Schrengohst
http://www.MotionZoneHD.com -
https://eww.pavc.panasonic.co.jp/pro-av/support/cs/csregistp2m/p2indexe.html
You should be able to find it here.
Let me know if you need any help.Mike Schrengohst
http://www.MotionZoneHD.com -
-
Noah, have you tried this?
I have a backlog of 1080 24pA footage that was shot with my HVX. I finally got my 5.1 in, does not remove the pulldown from 1080 24pA footage. I have tried every convolution. I set-up a 1080 23.98 sequence. Import from P2, click checkbox
to remove pulldown. I get a nice interlaced frame every forth frame.
You can import with the box not clicked, same thing. I tried importing with the box checked and unchecked with every different pulldown in set-up. It all looks the same.You can import the footage and then use Cinema Tools to remove the pull-down.
I also have Edius. I can import the same 1080 24pA file directly from the P2
and remove the pull-down and it looks great. So for now I use Edius to
process 1080 24pA footage shot with the HVX.Mike Schrengohst
http://www.MotionZoneHD.com -
After you set your project up as 1080 60i go to sequence settings
and you will find 1080 24p. For some reason it is not a choice
when you do easy set-up??Mike Schrengohst
http://www.MotionZoneHD.com -
It always re-assuring to see Shane’s smile!
He is a great asset to the team!Mike Schrengohst
http://www.MotionZoneHD.com -
Wow, good luck.
If they did not give you TC of what was what this will take 3 times as long to just get into the computer. I don’t even want to ask why?? I would log the tape and try to discern what is what. Then digitize set-up for 24p first. If your not sure,
I would digitze all at 24p. Look at the clips. You can probably figure from that what was 60i. The 30p may be harder to discern. If you have audio with any of that good luck again.
But with the proper use of Cinema Tools you should be able to conform the 30p and 60i clips to 24p.Mike Schrengohst
http://www.MotionZoneHD.com