Forum Replies Created

Page 342 of 391
  • Michael Sacci

    February 5, 2008 at 5:47 am in reply to: Epson Print CD with HP Printer?

    There is a an Adjust Print Position under File, not sure if you could to set for that much but you can give it a try.

  • Michael Sacci

    February 5, 2008 at 5:42 am in reply to: DVD dubbed to VHS with a tuner?

    There are combo units at any WalMart/Best Buy.

  • Michael Sacci

    February 5, 2008 at 5:39 am in reply to: Best dual-layer (DVD-9) media? +R or -R

    Stay with Verbatim and +R. When I find something that works I stop looking. there are reported issues with -Rs.

  • Michael Sacci

    February 4, 2008 at 3:42 pm in reply to: What else compares to Aja IO HD?

    From what you have listed there doesn’t seem to be a good reason to go with anything other than a card. The Kona cards are great and have worked solid for years. (Don’t have Blackmagic cards so I cannot speak for them.) The Kona Cards also handles DVCProHD acceleration which is an added bonus. I think the IoHD makes sense if you want to be able to hook up different computers at different times or you need to be portable but for a single tower I would go with a Kona card.

  • Michael Sacci

    February 4, 2008 at 8:43 am in reply to: AJA IOHD, MBP and digibeta printing

    If you only need it for Dbeta why not save some money and get a Io D, should be able to pick one up for around $900. These work great with the MBP to DBeta.

  • Michael Sacci

    February 4, 2008 at 4:25 am in reply to: airline travel & equipment

    I just flew with 3 checked HVXs and they each had 2 batteries in the case and they went through Nashville and Miami airports. But like was mentioned it takes time to get things in place. It is getting to where it may be easier to just drive everywhere.

    If anyone is wondering why this change, Lithium is a highly explosive element and most of the mass of the battery is there to keep it from doing so. (at least that is what my son, a chemist, tells me) But my question why is safer to carry it on then to check it.

  • Michael Sacci

    January 23, 2008 at 10:44 pm in reply to: Transferring Long Clips Spanning Cards

    Thanks, I watch through your tutorial, very helpful, who would have thought to make folders before you start shooting and have people yelling “How long before we are ready to go again!”

  • Michael Sacci

    January 21, 2008 at 1:15 am in reply to: Final Cut Pro 6.0.1. upgrade? God help me….

    Email me at webstuff at michaelangelodv dot com

  • You do realize that a lot of the formats you are trying are not compatible with DVDs. DVD are only m2v video (mpeg2) with PCM or ac3 audio.

    If you use PCM audio you have to encode the m2v at 5 Mbps (average if using VBR) or 6.5 if you use ac3.

    Concert DVDs are worth PCM audio if it has been professionally mixed and mastered but most of the time ac3 does just fine and it gives you extra bitrate for the video.

    Either way you go, export to compressor from FCP and use the 90 Best for the encode if you want to do that but I would try making a new preset with the CBR setting at 6.5 and encode the audio to ac3 and see if you like what you see and hear.

    I never recommend doing the encoding in DVDSP.

  • Michael Sacci

    January 16, 2008 at 4:32 pm in reply to: Public Domain Footage

    E, you must remember that just because an event is public that does not make images and video public domain. The person (or origination) that takes them holds the copyright unless they state otherwise. Most news channels sell there footage for a fee.

Page 342 of 391

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy