Maurice Jansen
Forum Replies Created
-
hi there
first i’m not conservative and really open for new things.
actually our company did a few stereo production several years ago.
imagine this 2 BTS LDK14’s and 2 BCN’s where used on our first production and succesfull. 😉BUT do you want to see this all night long and can you use it for every genre/program.
I guess not.
feature films YES but what about sport.(where you have limited control of your DOF and framing). not even talking about news(i guess we don’t want so much reality some time’s).
what i mean to say is what makes a channel a good channel.
i guess it’s programming.
News, sports, entertainment & films on the right time.
only the last are suitable for stereo such a big investment in stereo for say 30% of your program’s is not economical.stereo in the theater/cinema yes.
stereo at home whatching VOD or a Blu-ray (or what ever) yes.
broadcast channel no.for broadcast i have a stronger feel for the HighVision project of NHK
filling the human field of view with the resolution / resolving power of the eye.greet
MauricePeople saying they don’t make mistake’s often make nothing at all!
-
wow i guess something went wrong here.
Bob is talking about a ultrascope and
While Ronan is talking about a Decklink SDI card 😉i guees you have to look at
https://www.blackmagic-design.com/support/detail.asp?techID=47greet
MauricePeople saying they don’t make mistake’s often make nothing at all!
-
second hand
panasonic MX70grt
mauricePeople saying they don’t make mistake’s often make nothing at all!
-
as i work in a facility that actualluy is floating between broadcast and provideo we get masters from al kind’s of facilities.
We often get tape’s that are poorly mastered and then you really respect the tape’s that meet a standard.we often get 3kind’s of masters
1
master from “i have a apple so i’m the man kids”
That start at TCrandom often on the exact beginning of the tape whit audio way too loud no master report no label and don’t forget not recordinhibited.2
tape’s Striped with Bars and Tone from the deck which are on first sight found to be good. but half way the dub the tapeoperator actually find out that audiolevels are too loud and videoquality on homebrew DVlevel. again often badly labeled no master report3
and master’s made by pro facilities (which is a delight)if you have 70% of type 1 and 2 you really love type3
greet
MauricePeople saying they don’t make mistake’s often make nothing at all!
-
hmm
i’m not sure but i guess the old D2 output’s a 4Fs composite digital signal and not our everyday used component digital signal. i guess everything is actually working but outputting the wrong standard. i guess if you want to use the paralel output you have to use a transcoder (we use the innovision DX210 and DX120 for our VPR3 and panasonic D3).
or use a highquality composite to digital encoder.greet
MauricePeople saying they don’t make mistake’s often make nothing at all!
-
agree big time.
although it already is a gift to the industry these addition will be great.
errorlogging should only be a software thing since the data is already there. but will give the product so much more
what also would be a great feature is data analyzing. again data is there so why not showing it to us in HEX.
greet
MauricePeople saying they don’t make mistake’s often make nothing at all!
-
hmmmm
i don’t want to be offensive but what more do you want to see on the scope’s of the FSI. maybe i look over something if so learn me.
they are IMO only representing picture data. and telling you nothing about the physical layer of the signal. there are no CRC’s or EDH checked in the FSI nor jitter or level problems.if there are no other source’s indeed use your NLE as a source. if there are more source’s maybe disconnect them all. maybe there is some crosstalk going on. a other thing not likely but possible is a groundloop.
greet
MauricePeople saying they don’t make mistake’s often make nothing at all!
-
well
on the first place what do you expect to happen when you want to lock a video router? the only thing that can happen is that you can cleanly switch source’s that are locked, properly timed and from the same signal type. (it does not lock input signals to ref)
which is not a real must in a post-only facility. so IMO don’t worry about the REFinput of the hub.
how big is the facility what kind of cable run’s in meters do you have??
and more important what kind of cable is used?
have you tried a SD-SDI signal yet?i have the strong feel that you have a DOA (death on arrival)
without measurement it’s hard to find problems. the ultrascope is a nice scope for measuring the incapsulated signal like video/audio levels and is a real breakthrough and i guess it’s nice to give these to the editors. but it still (maybe there is more to come) cannot measure problems on the physical layer.(which you are experiencing) so for a engineer it is actually not enough. if i must invest with a small budget in measurement i would use the
https://www.phabrix.com/phabrix-sxe-eye-and-jitter-767-0.htmlgreet
MauricePeople saying they don’t make mistake’s often make nothing at all!
-
hi eric
you are trying to get analog syncpulses through a SDI router. i’m sorry but your system setup will never work.
do what bob already suggested quite alot buy a patchbay buy 2 cheap ass VDA’s one for trilevel one for BB. normalize the patchbay to give al your decks BB and make trilevel patchable.
and bring all the SDI or HD-SDI output’s to the videohub.greet
MauricePeople saying they don’t make mistake’s often make nothing at all!
-
first
==> NEVER EVER <== Do things in this menu if you don't know what it is. adjusment can look if they did not do anything but you can endup with tape's that can only be playedback in your deck. due to differences in RFlevels on the tape. if your lucky you can enter this menu with the frontpanel. when your in the standard menu keep CTLpressed and momentary press SET. if the menu does not change you need to open the deck and change BIT7 on Dipswitch S100 on the SSboard. the longboard nearest to the drum on the right when the frontpanel face you.(wow hope you find it) this gives you access to the maintenance menu. when your in the special menu you can navigate with the menu button the set button. changing things goes the same way as in the normal menu. succes Maurice People saying they don't make mistake's often make nothing at all!