[Manuel Deo]

Hi,

i think i will choose the M_audio projectmix interface because, the update of drivers and firmware of tascam product isn’t not good and reactive.

project mix is more reactive on the update, i try this mixer and i tell you some news about this as soon as possible.

best regards

manuel

[Manuel Deo]

thanks for yours answer,

Do you think the slot 2 is the better pci express clot to connect the kona lhe on mac pro 2008??

thanks

manuel

[Manuel Deo]

Hi stewart, I have install the XP64 Ps, with the 64 bit driver of decklink Hd pro.

If you have more 3 Gb memory, the system crash, because those decklink drivers don’t work with a systeme with more 3 gb memory.

I working with the adobe video suite and adobe work very well.

Adobe recongnize my 4 gb memory, and i appreciate to work with more more memory than 2 ghz.

But i have allways the same probleme with the input video.

Blackmagic team’s says the new 64 bits drivers are ready soon to work with more than 3 Gb memory.

So i’m waiting for those new drivers

regards Manuel

[Manuel Deo]

hi stewart,
My pci x bus works at 133 Mhz, and i have take out all other card on my PC.

Just the decklink and my ATI graphic card was in the computer.

And the problem stays ” No video input”

I have install another decklink car ( The decklink Pro ” and there is the same problem.

So, i don’t know where is probleme, my Mobo ? The drivers? The windows OS??

It’s frustated to don’t know where is the origin of this problem

Thanks for your help

Manuel

[Manuel Deo]

HI Kristian,

Wonderfull,
Good news

i hope that this new drivers are ready soon.

regards

Manuel

[Manuel Deo]

hi Jan,

unfortunality, i have try to put the decklink in another pci x slot ,but always the same no video input.

Thanks for your help,
maybe to morrow is a better day

manuel

[Manuel Deo]

hi stewart,
Thanks for your answer.
I looking for a solution of my problem of no video input detect by hd decklink pro.

So, your decklink card works good with supermicro MoBo x6dae-g2, can you telle me if you use the bios default configuration, or have you doing special configuration ??

I acknowledge being exceeded by my “no video input” problem.

thanks

Manuel

[Manuel Deo]

hi Kritian,

I have take off 2 gb memory and the drivers are good.
I have install those and there is no crashes.
So when do you think new drivers are ready for system with more than 2 GB memory.

Thank for the solution at one of my problems.

I have a second one, i can’t capture the sdi input video with my declink.
Novideo input with xp 32 and xp 64?
My deck is a sony dsr 1500 with sdi output input Board. I see the sdi output on my monitor with sdi board, but my decklink says that no video input.

What do you think about that?
A system configuration, problem or a decklink card failure??
I try to install in an other pci-x slot, but the problem stays.

I appreciate your help and the blackmagic team help

thank

MAnuel

[Manuel Deo]

Hi Jan,

Infortunatly, i have the same problem like you.

I have the logo “no video input” in my decklink overlay.

So i can’t help you, but my system has 4 gb of ram, and i have read this :

https://blackmagic-design.com/support/detail.asp?techID=160

I try to take off 2 Gb.

I do this test and i tell you if something good happens

[Manuel Deo]

hi Kristian,

I have more than 3 Gb of ram, i have 4 Gb of DDR 2 400 ECC memory.

I have read the web adress, and i think i’m too rich of memory.

I try to take 2 Gb memory off and i try to reinstall decklink drivers.
Thanks, maybe i find with this adress a lot of answer for a lot of question.

Thanks

Manuel