Replies – Forums – Kristian Lam – Page 41

Forum Replies Created

Page 41 of 143

← 1 … 40 41 42 … 143 →

Kristian Lam
May 24, 2009 at 2:24 am in reply to: Basics of Intensity Pro (specifically, how does capture work exactly)

Hi

Intensity Pro works by allowing you to input full resolution video and then decide what to do with it when capturing. Unlike the DV bridge you’re using which has a DV encoder and thus limiting you to the DV codec, you don’t have such a limitation with Intensity Pro.

That doesn’t mean you have to capture Uncompressed video though. You can also use the Blackmagic MJPEG codec we provide as well as any other that is quick enough to compress on the fly.

Vegas is another subject altogether. We current do not support Vegas with our current drivers.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
May 24, 2009 at 2:17 am in reply to: Problem of display resolution with a decklink SP card & a HDLink

Hi

HDLink is designed to provide a pixel for pixel output of your video and since you’re sending it an SD signal, it appears as a small image on your HD screen. However, you can scale an SD image 2x via an option in the HDLink utility. Can you verify that you’ve done so?

regards

Kristian Lam
Blackmagic Design
Kristian Lam
May 24, 2009 at 2:10 am in reply to: 1080p uncompressed project

Hi George,

We make no distinction between PSF and P on file as this only matters in the actual transport of the video signal from one device to another. Since you’re going to be outputting to Hdcam, you’ll need to use PsF as the transport stream or the VTR will not see the video signal.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
May 24, 2009 at 2:07 am in reply to: Intensity Pro – Can’t Capture In HD?!

Hi

What is the source ending the HDMI signal?

regards

Kristian Lam
Blackmagic Design
Kristian Lam
May 15, 2009 at 7:57 am in reply to: Why Blackmagic doesn’t offer support for 25p

Hi Sebastian,

You’re right. Sony VTR uses the PsF transport method and we don’t currently support true P capture and playback, only PsF.

The question is if there is a display out there that takes a progressive (not PsF) HD-SDI signal for monitoring? Could you point me to one?

regards

Kristian Lam
Blackmagic Design
Kristian Lam
May 12, 2009 at 2:15 am in reply to: hd extreme 3 second sdi input

Hi,

The second SDI input is the channel B link for use when you’re capturing dual link 4:4:4 RGB video from a device such as the HDCAM-SR and is not a discrete input that you can toggle.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
May 12, 2009 at 2:13 am in reply to: Blackmagic software only drivers

Hi Chris,

When you say you’re having trouble reading the files, what exactly is the trouble? Is it showing up in a different color rendering? Is it corrupted? Are you getting error messages from your system?

What kind of AVI codec is your VelocityQ system using? Is it 8-bit or 10-bit? Do you know what kind of FOurCC they are using? Maybe it’s a FourCC conflict?

There are still a lot of unknowns in this so further investigation is required.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
May 12, 2009 at 2:11 am in reply to: Why Blackmagic doesn’t offer support for 25p

Hi Sebastian,

What is the device you’re using that’s sending out 1080p25?

regards

Kristian Lam
Blackmagic Design
Kristian Lam
May 11, 2009 at 10:40 pm in reply to: BM Video Recorder-what format in full-res?

Hi Patrick,

The Video Recorder is a hardware H.264 encoder every it captures is to H264.

regards

Kristian Lam
Blackmagic Design
Kristian Lam
May 11, 2009 at 10:39 pm in reply to: UltraScope again

Hi,

It’s not the size of the monitor but the resolution. You’ll need a monitor that supports 1920×1200 so if the 22″ is of that resolution, it will work.

regards

Kristian Lam
Blackmagic Design

Page 41 of 143

← 1 … 40 41 42 … 143 →