[John Fishback]

Check out this COW tutorial. Some of the principles may work for you.
https://library.creativecow.net/articles/smith_stephen/motion_hologram.php

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.5 QT7.5.5 Kona 3 Dual Cinema 23 ATI Radeon HD 3870
ATTO ExpressSAS R380 RAID Adapter, PDE Enclosure with 8-drive 6TB RAID 5
24″ TV-Logic Monitor
Final Cut Studio 2 (up to date)

Pro Tools HD w SYNC IO, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

I’ve had instances where I had plenty of handle, but the transition appeared as a one frame transition. Almost didn’t see the transition the first time this happened. I double-click the transition, drag it some frames to the right, and increase the duration. Then it’s visible and can be further adjusted as needed.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.5 QT7.5.5 Kona 3 Dual Cinema 23 ATI Radeon HD 3870
ATTO ExpressSAS R380 RAID Adapter, PDE Enclosure with 8-drive 6TB RAID 5
24″ TV-Logic Monitor
Final Cut Studio 2 (up to date)

Pro Tools HD w SYNC IO, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

Search the COW for the version of QT you want. The answer might be there. I’ve read posts about how to roll back, but can’t point you to them. Our other FCP system has FCP 5.1.4 and QT 7.1.3 with OS 10.4.8 and we’ve had no problems. If you can’t find the QT installer you need, perhaps re-post asking if anyone has that installer. If you just need to roll back one version you might find it on the Apple site.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.5 QT7.5.5 Kona 3 Dual Cinema 23 ATI Radeon HD 3870
ATTO ExpressSAS R380 RAID Adapter, PDE Enclosure with 8-drive 6TB RAID 5
24″ TV-Logic Monitor
Final Cut Studio 2 (up to date)

Pro Tools HD w SYNC IO, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

See Shane’s Stock Answer #1 https://library.creativecow.net/articles/ross_shane/fcp_faq.php

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.5 QT7.5.5 Kona 3 Dual Cinema 23 ATI Radeon HD 3870
ATTO ExpressSAS R380 RAID Adapter, PDE Enclosure with 8-drive 6TB RAID 5
24″ TV-Logic Monitor
Final Cut Studio 2 (up to date)

Pro Tools HD w SYNC IO, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

See Shane’s Stock Answer #1 https://library.creativecow.net/articles/ross_shane/fcp_faq.php

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.5 QT7.5.5 Kona 3 Dual Cinema 23 ATI Radeon HD 3870
ATTO ExpressSAS R380 RAID Adapter, PDE Enclosure with 8-drive 6TB RAID 5
24″ TV-Logic Monitor
Final Cut Studio 2 (up to date)

Pro Tools HD w SYNC IO, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

Generally speaking, the bigger the room the longer the reverb takes to fade away (and the higher the reverb setting). So a high amount of reverb would imply a large room. Adjust the reverb so it sounds correct for the size of your room. If it’s a small room you might never hear the reverb. The pre-delay is the amount of time before reverb is applied. I’m not sure that’s a control you need to use. Start off with it set to zero. You might also try eq-ing the voice a bit (cut some lows) which might make the sound seem farther away. EQ may be enough to achieve the effect you want. You probably should use the reverb sparingly. Try different settings and use what sounds right to you.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.5 QT7.5.5 Kona 3 Dual Cinema 23 ATI Radeon HD 3870
ATTO ExpressSAS R380 RAID Adapter, PDE Enclosure with 8-drive 6TB RAID 5
24″ TV-Logic Monitor
Final Cut Studio 2 (up to date)

Pro Tools HD w SYNC IO, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

If the audio eng used Pro Tools (or any DAW for that matter) to record, ask exactly what frame rate he used. There are many choices that could cause the audio to go out of sync with the video. Let us know his settings. Pro Tools has a number of settings that might on playback bring the well recorded audio back into sync with at least one of the cameras. Then you could cut in the other cam as suggested above, pulling it into sync for short segments.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.5 QT7.5.5 Kona 3 Dual Cinema 23 ATI Radeon HD 3870
ATTO ExpressSAS R380 RAID Adapter, PDE Enclosure with 8-drive 6TB RAID 5
24″ TV-Logic Monitor
Final Cut Studio 2 (up to date)

Pro Tools HD w SYNC IO, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

Have you mixed down your audio tracks? Sequence Menu>Render Only>Mixdown

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.5 QT7.5.5 Kona 3 Dual Cinema 23 ATI Radeon HD 3870
ATTO ExpressSAS R380 RAID Adapter, PDE Enclosure with 8-drive 6TB RAID 5
24″ TV-Logic Monitor
Final Cut Studio 2 (up to date)

Pro Tools HD w SYNC IO, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

Call: https://www.macievideo.com/ They are terrific!

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.5 QT7.5.5 Kona 3 Dual Cinema 23 ATI Radeon HD 3870
ATTO ExpressSAS R380 RAID Adapter, PDE Enclosure with 8-drive 6TB RAID 5
24″ TV-Logic Monitor
Final Cut Studio 2 (up to date)

Pro Tools HD w SYNC IO, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

Checkout: https://www.dvdxdv.com/NewFolderLookSite/VeeScope/Products/VeescopeLive.inDepth.htm#Live_chroma_keyer

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.5 QT7.5.5 Kona 3 Dual Cinema 23 ATI Radeon HD 3870
ATTO ExpressSAS R380 RAID Adapter, PDE Enclosure with 8-drive 6TB RAID 5
24″ TV-Logic Monitor
Final Cut Studio 2 (up to date)

Pro Tools HD w SYNC IO, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN