[John Fishback]

Need more info. What kind of computer and i/o card or device? What kind of drives and their speed? What monitor?

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.1, Motion 4.0.1, Comp 3.5.1, DVDSP 4.2.2, Color 1.5.1)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

For the ISDN setup I’ve used a combination of 4 settings: Layer 3 (I think we did a Layer 2 session once) Stereo or Dual Mono at 48k or 32k sample rate. I basically setup according to the receiving (chasing) studio. When I asked why a 32k sample rate they said they’d had better luck with the tc. But I’ve used 48k with some studios and never had any trouble. I’ve never been the chaser, only the chasee. We almost chased a couple of weeks ago for the new Barry Levinson film, “You Don’t know Jack,” but the schedule changed at the last minute.

As for setting up the Sync IO:

In Setup Menu > Session:

Clock Source – Sync IO
Time Code Rate – specified – usually we get a 29.97 QT of picture

Sync Setup to Generate tc External t/c offsets 0
Clock Ref – Video Ref
Positional Ref – Generate
Video Format – NTSC

Time Code Settings
Generator – CHECK “Using SYNC”
Freewheel – NONE
Pull Up/Down – None or as specified

Sync Setup to Chase tc External t/c offsets 0
Clock Ref – Video Ref
Positional Ref – LTC
Video Format – NTSC

Time Code Settings
Generator – UNCHECK “Using SYNC”
Freewheel – the number frames of bad t/c tolerated before stopping – 8 is default, higher as necessary
Pull Up/Down – None or as specified

That’s pretty much it. Make sure the Transport is Online. I always forget. Also, I always insist on a test hookup with picyure before the actual session with studios I’ve not worked with before.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.1, Motion 4.0.1, Comp 3.5.1, DVDSP 4.2.2, Color 1.5.1)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

We use ISDN for remotely monitored ADR. It allows the other end to chase our timecode and display picture in sync. Here’s an excellent article about ADR by the Cow’s Tim Wilson.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.1, Motion 4.0.1, Comp 3.5.1, DVDSP 4.2.2, Color 1.5.1)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

If you’ll do this a lot, checkout Digital Heaven’s Loader. It automatically converts audio to 48k 16 bit on import. It’s a great little program.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.1, Motion 4.0.1, Comp 3.5.1, DVDSP 4.2.2, Color 1.5.1)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

All clips have to be the same codec for multicam to work. It wasn’t clear to me if you are trying to edit with H.264. That is ng as H.264 is not an editing codec. It’s a delivery codec. You are correct that you both clips should be the same frame rate, frame size and codec (like ProRes). Try converting a short segment from each camera and see how it goes.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.1, Motion 4.0.1, Comp 3.5.1, DVDSP 4.2.2, Color 1.5.1)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

You’ll find folks on both sides of the fence with that one. Search the Cow here in FCP forum and also the Cinematography forum and you’ll find a lot of discussion.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.1, Motion 4.0.1, Comp 3.5.1, DVDSP 4.2.2, Color 1.5.1)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

Have you trashed prefs & repaired permissions?

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.1, Motion 4.0.1, Comp 3.5.1, DVDSP 4.2.2, Color 1.5.1)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

Checkout Graeme Nattress’ Standards Conversion software.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.1, Motion 4.0.1, Comp 3.5.1, DVDSP 4.2.2, Color 1.5.1)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

What kind of QT file are you making with Flip4Mac to bring into FCP? Dors your sequence setting match the QT file parameters? Mismatched file and seq settings are usual cause for unexpected rendering.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.1, Motion 4.0.1, Comp 3.5.1, DVDSP 4.2.2, Color 1.5.1)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

If you search you’ll find many recommendations. However you choose to go, test yout workflow before you shoot. Take your workflow up to the video master for filmout. Bring that to folks who’ll do your filmout and let them evaluate it. You don’t want to find you have a problem after the shoot.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.1, Motion 4.0.1, Comp 3.5.1, DVDSP 4.2.2, Color 1.5.1)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN