[John Fishback]

Using ProRes won’t negatively affect anything. Something else is going on. I’m confused about whether you’re trying to make a DVD or a standalone mp4 file. If a DVD, do as Michael suggests above and encode a mpeg-2(mv2) file. Don’t use a mp4 in a DVD. If it’s just a mp4 file, grab an image of Compressor’s Inspector and post it here so we can see all the parameters of your encode. That might spark some ideas.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.2, Motion 4.0.2, Comp 3.5.2, DVDSP 4.2.2, Color 1.5.2)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

Depending on how you monitor and grade your video, when you make a flv it may or may not (as in your case) resemble the original. A big advantage of Squeeze is you can apply filters that affect video parameters such as contrast, brightness and gamma (among others). Sometimes I’ll do short tests of encodes before committing to a batch, adjusting parameters until I’m happy with the result. You could turn that around and using a short clip from your edit, affect its gamma (or whatever parameters you choose) and encode it with Adobe Flash Encoder. Continue to tweak your edit until you have the result you want. Of course, ultimately, if you adjust your monitoring so that what you see is what you get after encoding, it will go easier.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.2, Motion 4.0.2, Comp 3.5.2, DVDSP 4.2.2, Color 1.5.2)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

You can do this easily when clips are in a sequence. Adjust the first clip, Copy it, select all the following clips you want to modify, and then Paste Attributes and select Distort in the pop-up window. I’ve never tried this is the browser.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.2, Motion 4.0.2, Comp 3.5.2, DVDSP 4.2.2, Color 1.5.2)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

Sometimes having more than one device on the Firewire port like the camera and an external hard drive can cause problems. Even though your Mac has more than one FW port, they are all connected to one controller. While it doesn’t always happen that multiple devices interact poorly, it does happen. A couple of years ago I connected a new drive to a 2nd FW port and everything ground to a halt. Just a thought.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.2, Motion 4.0.2, Comp 3.5.2, DVDSP 4.2.2, Color 1.5.2)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

Replacing lost information is always a challenge. You might have some success with the Apple/FCP filters, but it depends on what you’re starting with. Waves has a bass plugin that uses what they call psycho-acoustic technology. The plugin allows you to select a fundamental freq and it adds in harmonics of that freq thereby creating the impression of more bass. I don’t know if you can use it directly in FCP. I’ve used it in Pro Tools and it works well in the right situation.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.2, Motion 4.0.2, Comp 3.5.2, DVDSP 4.2.2, Color 1.5.2)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

I’m with Craig. I generally use Compressor’s DVD high-quality 90-minute preset which I believe is around 6.5mbps with peaks to 7.6 or thereabouts. I’d never have the average rate at 8mbps or more. That will almost guarantee problems with many players. But datarate isn’t the whole story. I also own BitVice which is a one-trick pony. It only does mpeg-2 for SD DVDs. But the results are amazingly good at data rates as low as 4.5 mbps.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.2, Motion 4.0.2, Comp 3.5.2, DVDSP 4.2.2, Color 1.5.2)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

I’ve never had a problem with pngs and I use then almost exclusively. Have you tried trashing prefs and repairing permissions?

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.2, Motion 4.0.2, Comp 3.5.2, DVDSP 4.2.2, Color 1.5.2)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

Jeremy Garchow came up with a workflow that might help: First, delete the new mix out of FCP and your timeline. Set FCP up in a 23.98 or 29.97 easy setup (whichever applies), then quit FCP. Now reopen FCP and reimport your new mix. The file should be in sync.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.2, Motion 4.0.2, Comp 3.5.2, DVDSP 4.2.2, Color 1.5.2)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

Do you mean that after you selected a clip in L&T and added it to the queue, three QuickTime files appeared in the logging bin? Were they also in the Capture Scratch for that project?

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.2, Motion 4.0.2, Comp 3.5.2, DVDSP 4.2.2, Color 1.5.2)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN

[John Fishback]

Your sync should be good. If you’re not seeing any drift, there isn’t any. Mini-DV is 29.97. Pulldown only comes into play if your framerate is 24P (23.976). Pulldown is removed to make 24P shot over 29.97 into true 23.976 (shorthand in FCP is 23.98, but actual rate is 23.976). But, to do this you need to shoot 24PA (advanced pulldown) so FCP knows how to correctly remove pulldown. Search pulldown and you’ll find many threads. Look for Graeme Nattress’ paper on 24P. It will explain everything.

John

MacPro 8-core 2.8GHz 8 GB RAM OS 10.5.8 QT7.6.4 Kona 3 Dual Cinema 23 ATI Radeon HD 3870, 24″ TV-Logic Monitor, ATTO ExpressSAS R380 RAID Adapter, PDE enclosure with 8-drive 6TB RAID 5
FCS 3 (FCP 7.0.2, Motion 4.0.2, Comp 3.5.2, DVDSP 4.2.2, Color 1.5.2)

Pro Tools HD w SYNC IO & 192 Digital I/O, Yamaha DM1000, Millennia Media HV-3C, Neumann U87, Schoeps Mk41 mics, Genelec Monitors, PrimaLT ISDN