Forum Replies Created

Page 2 of 5
  • Jeff Heck

    April 22, 2011 at 1:51 pm in reply to: AVC Intra and Chroma Key Tip, maybe!

    Thanks Rafael! Makes perfect sense. Don’t do a ton of chroma keying and relied on the settings of a friend.

    Jeff Heck
    NaJor Productions
    Indianapolis

  • Jeff Heck

    January 20, 2011 at 1:44 am in reply to: GY-HM 700 recording to SD card and upload

    Hey Mike.

    The workflow is easy. I shoot to the SDHC card and it wraps it in mov format for use with FCP. I am using Transcend SDHC Cards. These work with the camera and are quite affordable. You can purchase with a card reader, maybe $15 or so for the reader.

    I like this camera except for an audio issue. There is some type of grounding issue and it has to do with the optical board or something to that affect. Look lower on this forum for my earlier post. If they fix this issue, the camera is dynamite. If you get the camera with the audio issue, then you have to run everything you record through some type of audio software to get rid of the hiss.

    Jeff Heck
    NaJor Productions
    Indianapolis

  • Jeff Heck

    January 19, 2011 at 7:46 pm in reply to: Audio problem JVC GY-700 more info

    Another person wrote me and they have told me that the US JVC center in California thinks it calls for a new isolator ground to be added to the audio system and optical block to prevent voltage from getting into the
    audio.

    I know what you mean. I shot the narration for a ten part dvd series and discovered after the fact the hum was there. I’m looking to sell this camera and go a different route.

    Jeff Heck
    NaJor Productions
    Indianapolis

  • Jeff Heck

    November 25, 2010 at 5:19 am in reply to: Audio problem JVC GY-700 more info

    Nope. And you’re right. When you plug in anything it gets worse. JVC in the US says they think it’s something with the front optical cooling fan. I get the feeling they know what it is, but they can’t do anything, about it unless Japan approves. Let me know what happens with yours. Good luck!

    Jeff Heck
    NaJor Productions
    Indianapolis

  • Jeff Heck

    November 23, 2010 at 9:42 pm in reply to: Updgrading firmware on jvc hm 700

    I just did this a month or so ago. First, here’s the link to the JVC site

    https://support.jvc.com/pro/firmwareupgrade/versionentry.jsp?modelId=35

    Enter the info. You’ll then download the files to your computer. Included is a text file that gives you instructions on how to copy the files to your SDHC card and how to upload to your camera.

    It’s fairly painless.

    Jeff Heck
    NaJor Productions
    Indianapolis

  • Jeff Heck

    November 23, 2010 at 4:37 pm in reply to: Audio problem JVC GY-700 more info

    Sounds like static. You can hear it with no mics attached. Just put in the headphones and listen. It records this static as well. I have to run all of my audio through sountrack pro noise reduction to eliminate the static sound. Also, the longer the camera is on, the louder it gets.

    JVC in California was able to hear it on my camera and several others, meaning they replicated the sound. They know it’s an issue but there is no fix. Very frustrating. I’ve actually gotten five emails from other owners across the globe telling me they have the same issue from reading my original post here.

    Jeff Heck
    NaJor Productions
    Indianapolis

  • Jeff Heck

    October 13, 2010 at 2:42 pm in reply to: Audio noise with JVC GY-700 camera

    Yep, gotta do that. I was hoping there was maybe a firmware issue or something easy that might work. Of course dreams don’t come true! Thanks, it’s off to CA for a fix.

    Jeff Heck
    NaJor Productions
    Indianapolis

  • Jeff Heck

    October 12, 2010 at 3:50 am in reply to: Audio Noise

    Having a similar issue here, but the noise is there with no mics attached, just headphones. Not sure what’s going on.

    Jeff Heck
    NaJor Productions
    Indianapolis

  • Jeff Heck

    July 12, 2010 at 8:06 pm in reply to: Final Cut Pro 7/Final Cut Studio 3 worth it?

    wow, upgrade in the middle and it was fine? that says a lot! one thing i noticed too is that motion 4 will import rtf files. thanks for the input!

    Jeff Heck
    NaJor Productions
    Indianapolis

  • Jeff Heck

    December 16, 2009 at 9:46 pm in reply to: Best settings for timeline

    Forgot, not running Leoopard.

    Jeff Heck
    NaJor Productions
    Indianapolis

Page 2 of 5

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy