Replies – Forums – Hopperhd

Forum Replies Created

Page 1 of 3

1 2 3 →

Hopperhd
March 3, 2007 at 6:17 am in reply to: HVX200 Blown Internal Fuse???

Thanks all; it’s getting serviced in Santa Monica at The Video Clinic. Ask for Serg, he’s been a great help and truly represents great customer service.

For anyone else who is thinking about purchasing the Elipz battery for their HVX200. BE CAFEFUL when connecting it to your camera. Make sure everything lines up properly i.e. matching grooves, aligning the Anton Bauer text, and having enough light to see what your doing 🙂 , Then connect the power supply to your camera. I’m still a little confused how I did it. Nothing was forced when connecting everything, but could have possibly nicked something when plugging everything together. Humm…???

Anyway, I’ll try it again when it returns from repair.

On a side note… The Elipz kit is actually very compact and seems like it will be a nice addition if… I don’t blow another fuse.
Hopperhd
September 15, 2006 at 4:03 am in reply to: G5 Doesn’t Recognize My HVX

Thank you so much. I guess I missed this in the manual. Once again I appreciate all of your help!

Have a great night!

Jason
Hopperhd
September 14, 2006 at 4:09 pm in reply to: G5 Doesn’t Recognize My HVX

The thing is, that I wasn’t even using FCP. I was just trying to get the camera to show up as a drive on desktop. It seems like there’s no signal coming out of the camera. Humm… not sure what’s going on????

Thanks,
Jason
Hopperhd
July 18, 2006 at 4:42 am in reply to: Activated the Wrong Thing

Gracias!
Hopperhd
July 18, 2006 at 4:42 am in reply to: Activated the Wrong Thing

Gracias!
Hopperhd
July 12, 2006 at 4:07 am in reply to: Audio Tick on MP3 Import

Thanks Shane! I didn’t purchase it from itunes so no foul there. I greatly apprecitae the ultra quick response. I must say, once again this site is a huge asset to us all!

Have a great night!

Jason
Hopperhd
February 13, 2006 at 8:15 am in reply to: Inexpensive HVX200 Workflow

Thanks guys for the suggestions.

Gary, I’m not really sure what you mean?

Gary: “since it is a file transfer that is not an issue. however there is no NLE control of the P2 capture or record functions with the camera when connected via FW.”

I would be directly transfering it into a 500GB external hard drive from the P2 card(s) out of the camera, and then bring it into FCP5 via fire wire. Is this the wrong workflow?

Jason
Hopperhd
January 19, 2006 at 6:58 am in reply to: g5 2.0 dual core 2.0 vs. 2.7 dual

Thanks for the heads-up Mark!

The 2.7 machine is on its way! One thing though, the ATI 9650 graphics card seems a bit slower compared to a few other cards available, for a slightly higher price. Has anyone experienced challenges using this particular card w/ FCP5?
Hopperhd
January 16, 2006 at 8:39 pm in reply to: Specialist Keyboard and Shuttle

Thanks for the info!
Hopperhd
January 12, 2006 at 11:43 pm in reply to: Compatibility of a G5 dual core and Intel Based Software

Thanks for your insight. It looks like I’ll be peeling off a few Benj’s now and later! 🙂

Page 1 of 3

1 2 3 →