Replies – Forums – Gerry Condez – Page 5

Forum Replies Created

Page 5 of 11

← 1 … 4 5 6 … 11 →

Gerry Condez
July 4, 2012 at 5:38 pm in reply to: Media 100 Upgrade

Good that I saw this post. I also have a Matrox thunderbolt thats been sitting for a while waiting for this news. But going back, I have the same wishes as Marcus mentioned. I dont need all but something like the FCPX can do but better. Thanks in advance Boris!
Gerry Condez
June 14, 2012 at 7:38 pm in reply to: Cant open Media 100 lots of error messages

Thanks Floh, I just did a RAID setup earlier and probably got messed up. I’ll check my setup again. I just replaced my xserve and the drives cant be moved to the latest xserve. Got screwed up again by apple.
Gerry Condez
June 13, 2012 at 6:49 pm in reply to: Legacy Media100 systems: where to find updaters?

I have the version 6.0 and 7.0 email me your address. If you want to go back to 2.6.1 I have them too. lol
Gerry Condez
June 6, 2012 at 12:37 pm in reply to: Media100 can’t find Kona 3

[Michael Hanish] “Gerry,

You need to use an earlier version of the Kona driver as specified in the release notes, I think 9.05 or 9.06, until a Media100 update allows use of newer Kona drivers. MAke sure you uninstall the Kona software using the Uninstaller, restart, then install the correct version.

Hope this helps,
“

Thanks Mike, I saw the Kona back in Media 100. I used the 9.05. Took me a while to install everything fresh last night and I lost track of what version I installed. I probably installed all the latest version since they work with Final Cut X trial but now it does not show the A/V out for FCX, that does not matter anyway. Just checking if the kona card was installed right. Thanks again.
Gerry Condez
June 4, 2012 at 9:55 pm in reply to: Any news on a new version of Media 100 software?

[Jason Tower] “Just curious if anyone has heard any news/rumors about an updated version of the Media 100 software coming out in the near future. I think the last 2.1 update came out in August of 2011!

Jason W. Tower
Fiddler Films”

Hi Jason,
were you able to get any updates with the m100 and matrox mxo2 combination? ty
Gerry Condez
May 28, 2012 at 8:04 pm in reply to: Matrox MOx2 & Media100 2.x

Hi Jason, Thanks.I hope you got some good news but its a holiday weekend. I spoke with Matrox tech support before purchasing the MXO2 and said it works with media 100. I guess, working with issues was not mentioned to me. I am hoping they find solution fast, I need a system again this weekend. They got my email too and said they will email back if found a fix. Ty
Gerry Condez
May 14, 2012 at 3:58 pm in reply to: importing avchd files

You should use import then AVCHD and it will open up ClipWrap.
Gerry Condez
May 3, 2012 at 5:13 pm in reply to: My Design

Thanks Fermin,
Yes it has everything you need even adjustable handle, strap attachments a custom padded foam with velcro with rain cape inside and it will protect your back once you sling the unit. It looks like a roll bar foam. The handle on the new unit I have is angled for more comfort and has another adjustable 3/4 inch tube to rest your fingers like a grip. Also, if you would need to attach LANC control. Pictures soon with 3 point monitor attachments.
Gerry
Gerry Condez
April 26, 2012 at 4:09 pm in reply to: Can you (file) import without audio?

I am guessing that the track map is only when acquiring video but not importing. I dont think I have seen another button to disable audio upon import.
Gerry Condez
April 26, 2012 at 4:03 pm in reply to: 16 min hd video for vimeo

Thanks,
Was able to do from 7+GB to 980 MB just making it 1280×720 but with same settings as the 1920×1080, only the size I changed. It seems fine for internet. Upon uploading files, got message that audio bit rate is too high set to lower for faster uploading. Its fine anyway.

Found this too after uploading, might help. https://vimeo.com/help/compression

Page 5 of 11

← 1 … 4 5 6 … 11 →