Gary Adcock
Forum Replies Created
-
[lee hunt] “The Ki Pro recognises the file as the correct format, just fails to be able to play it.”
that is an audio issue.
gary adcock
Studio37Post and Production Workflow Consultant
Production and Post Stereographer
Chicago, ILFollow my blog at https://www.garyadcock.com
Or follow me on Twitter
@garyadcock -
[lee hunt] “We’ve now purchased a new Apple Mac to encode ProRes files, we’re using Apple Compressor 4. These files are still not playable on the AJA Ki Pro Quad !!”
Kipro files have a specific encode needs did you follow it?
The main issue is the audio not being encoded at 48k 24bit as mono tracks.
most encoders default to 16bit audio with stereo tracksgary adcock
Studio37Post and Production Workflow Consultant
Production and Post Stereographer
Chicago, ILFollow my blog at https://www.garyadcock.com
Or follow me on Twitter
@garyadcock -
[Ichsan Rachmaditta] “Why is this happening?, anyone can help?
“the .ari fil sequence does not allow for the audio recording internally because there is no provision for the audio file to be included with a sequence of still frames. This is the correct recording procedure and the reason for using dual system sound.
gary adcock
Studio37Post and Production Workflow Consultant
Production and Post Stereographer
Chicago, ILFollow my blog at https://www.garyadcock.com
Or follow me on Twitter
@garyadcock -
[Peter Fagan] “In the IoHD Control Panel, The Ref In portion of the block diagram flickers, apparently unsure of WHAT is coming in.”
Since you have both NTSC and PAL signals into the machine it does not under stand. Disconnect everything but the SD signal set ref to video signal and it should be fine.
This is an issue with the way you are using the unit, not with the unit itself (IMHO)
gary adcock
Studio37Post and Production Workflow Consultant
Production and Post Stereographer
Chicago, ILFollow my blog at https://www.garyadcock.com
Or follow me on Twitter
@garyadcock -
[Andres Delgado] “I get this: “Formating is not possible in this mode””
Reboot the camera, make sure the card is Unlocked.
Set the camera to not be in HS mode, or set frame rate to less than 30p and reformat Sounds as if you are formating a card when the camera is at too high a frame rate to be effective.
gary adcock
Studio37Post and Production Workflow Consultant
Production and Post Stereographer
Chicago, ILFollow my blog at https://www.garyadcock.com
Or follow me on Twitter
@garyadcock -
[Nick Natteau] ” Sony HVR-M35U HDV VTR”
Opps that was the other Sony model that does not have deck control.
gary adcock
Studio37Post and Production Workflow Consultant
Production and Post Stereographer
Chicago, ILFollow my blog at https://www.garyadcock.com
Or follow me on Twitter
@garyadcock -
[Nick Natteau] “The only way I can control my Sony HD DVR tape deck (from Final Cut Pro 7 or Premiere Pro CC) is through firewire. “
Unless you are using a DSR 11 most Sony Decks can use the RS422 serial connector for Deck control.
gary adcock
Studio37Post and Production Workflow Consultant
Production and Post Stereographer
Chicago, ILFollow my blog at https://www.garyadcock.com
Or follow me on Twitter
@garyadcock -
[Sam Palmucci] “I’m recording to an AJA Ki Pro recorder in Pro Res and the video appears darker than I expect in FCP7.”
The KiPro is not changing the signal while it is recorded it is not designed to do that, are you sure that your monitoring is correct?
gary adcock
Studio37Post and Production Workflow Consultant
Production and Post Stereographer
Chicago, ILFollow my blog at https://www.garyadcock.com
Or follow me on Twitter
@garyadcock -
I have seen TV’s themselves crop the image, but I have not see the Ioxt do that.
Are you sure the frame size was correct in AE?
AE is not bound by SMPTE sizes like the output signal is.
gary adcock
Studio37Post and Production Workflow Consultant
Production and Post Stereographer
Chicago, ILFollow my blog at https://www.garyadcock.com
Or follow me on Twitter
@garyadcock -
[Rick Lang] ” is in System Preferences/Network. On a Mac with Thunderbolt, it shows up when you click the + button to add a network connection.”
yup, the same place is is for selecting IP over both FW and Bluetooth.
It has been there all along gentlemen and ladies, it is part of the TBT specs
gary adcock
Studio37Post and Production Workflow Consultant
Production and Post Stereographer
Chicago, ILFollow my blog at https://www.garyadcock.com
Or follow me on Twitter
@garyadcock