Floh Peters
Forum Replies Created
-
[Chris Stevens] “So, as there are separate TC outputs on the EX3, can I connect this to the LTC timcode input on the HDx box?”
You can connect it but you won´t get Timecode from it. Actually, the port currently does nothing as far as I can tell.
-
You cannot see timecode from a (HD-)SDI connection, you can only get Timecode from a deck control connection. If you use the EX3, probably your best bet will be to connect the camera via FireWire for deck control and via HD-SDI for video input. Make sure that the deck control is set to FireWire, and you should get timecode and deck- (camera)-control.
-
[olof ekbergh] “I have all the 6.0.2 AJA install done and M100 13.01 installed with LHe system, but I did not get the AJA control panel just a simple M100 control panel, not the same as in manual, I thought it was installed with the AJA package. “
The Aja Control Panel is actually an application and should be installed in your Applications folder. And regarding 6.0.3, I´d recommend to wait for an official post from Wick.
-
First, set your FCP video out as your timeline. Let´s say you are working in 1080i25, then set your Video Playback in FCP to Aja 1080i25 8bit.
Then, open the Aja Control Panel. Under “Format”, set the Primary Format to 1080i25, and the Secondary to 625i25. Then, under Digital Out set up your SDI outs with the formats you want to use (e.g. Primary if you want to see 1080i25, or secondary if you want to see 625i25). Under Analog out, set your outputs as you want to use them. -
This should not happen on V12 and OSX 10.4.11. So you need either to stay on 10.4.11, or you need to upgrade to Media100 V13.0.1, as far as I know.
-
This problem has been fixed in 13.0.1. Apple broke a function Media100 was using in one of the OSX updates, and the Media100 engineers worked around it for 13.0.1.
-
Maybe it is related to OSX10.4.11? V13.0.1 is pnly tested under 10.5.x, so maybe the importer also only works there. And yes, I’m using CS3 8.0.2.
-
Hmmm, that works fine for me. Do you still have the older AE importer (the “Media 100 XML Project Importer”) installed somewhere? Maybe this causes a problem. But I am not really if that could cause your problem
-
[Michael Slowe] “It is correct, is it not, that downscales within the new Media 100 (AJA board) are done in software?”
The Aja boards also do have scaler hardware chips, but they are not as expensive as the ones in the HDx hardware.[Michael Slowe] “Whilst we’re on the subject of ‘old’ Media 100 hardware can I ask Wickham whether he expects up grades to 13 and onwards when they come, to support the HDx Board?”
Maybe Wick can say something about future upgrades, but the current V13.0.1 does run on HDx hardware.
-
[Todd Bunnell] “You know the saying, “if it ain’t broken, don’t fix it.” At this point do you believe updating to QT 7.6 would help solve our problems? “
It definitely should not make things worse.