Floh Peters
Forum Replies Created
-
Two things: Do you have a chapter mark on the first frame? If not, try setting one there.
And, you have to turn on the chapter track in the QuickTime movie. To do that, open the file in the QuickTime Pro player (Version 7) and press CMD-J to show the clips properties. There you have to activate the Chapter track. In QT6 I think it was under “Edit->Enable tracks”. A more detailed explanation can be found here (under the “Chapter” topic. In the BitVice status window you should see the chapters during the first pass of encoding. -
When digitizing component signals you also should connect a Composite out signal to the Composite in of Media 100 as a reference. This should fix the problem.
-
So you
-
I do still use the V1.5 of the RAID admin. If you want you can send me an email and I will send you the 1.32 firmware. Then you don
-
The HDx board should go into slot 2+3 of the G5, and the FC card in slot 4 (the one that is farthest away from the graphics card). What FC card do you use? Do you use the latest drivers for the FC card?
If you still have performance problems on your XServe RAID, try downgrading its firmware to 1.32/1.26, which is included in this updater, I think. When we upgraded the RAID firmware to 1.5 we had all kind of performance problems that were fixed by downgrading to 1.32/1.26 again. -
Chris,
there were upgrade offers for Media 100 i customers to HD some time ago; I don
-
Sounds like either a bad board or a sync issue. Can you post a picture of the problem somewhere?
-
[Bobby Mosaedi] “i have notced the lag when scrubbing through the timeline, (ill scrub 30 seconds forward, and the monitor wont respond until i let go of the mouse and then it plays back all the frmaes i scrubbed through reallly fast on its own. from my own experience m100hd is not 100% perfect when working with the media100i codec because it is processing everything in software, as opposed to the p6000 board. “
We never see this problem, even with 6 systems playing back and working from the same FC array. And the software codec implemention is on todays G5s much faster than the hardware codec ever was.
[Bobby Mosaedi] “one huge complaint i have is trimming clips with audio scrubbing on… causes media100HD to crash quite frequently, only on clips with media100i codec.”
We never got used to the audio scrubbing of Media 100, so I