Replies – Forums – Emilio Batungbacal

Forum Replies Created

Page 1 of 2

1 2 →

Emilio Batungbacal
July 29, 2015 at 12:09 am in reply to: MacPro reboots after switching to GTX 980

I swapped out the ATI card for the GT 120 same problem the system works for a while then suddenly just reboots. And like Greg I did countless trials of Nvidia GPU and CUDA driver combination with no success. I was just about to give up until I decided to revisit the power connectors in the CUBIX.

My ASUS GTX 980 has two power connectors, a 6 and 8 pin, I used the included 8 pin to dual 6 pin adaptor from the kit to hook up the card to the Cubix. What I did differently this time was to plug one of the extra 6 pin connectors into the remaining power slot on the GTX 980 (I was afraid it would fry the card, but I had no other options left).

Well I’m happy to report it now works flawlessly with both R11 and R12 with the ATI 5770 as GUI (also set ‘Use GUI for compute’ to ON).

Emilio Batungbacal
Colorist

Color Chemistry

2010 MacPro 2.93 12 core | 12 GB RAM | GT 120 | GTX980 | Cubix D4 | Dulce ProDQ G2 8TB | HP Dreamcolor | AJA HDP2 | Resolve 11.3.1
Emilio Batungbacal
July 28, 2015 at 3:45 am in reply to: MacPro reboots after switching to GTX 980

It still reboots while running Resolve. I removed the ATI card and replaced it with an Apple GT 120 Nvidia card for the GUI. Also unchecked the ‘Use GUI for compute’.

Emilio Batungbacal
Colorist

Color Chemistry

2010 MacPro 2.93 12 core | 12 GB RAM | GT 120 | GTX980 | Cubix D4 | Dulce ProDQ G2 8TB | HP Dreamcolor | AJA HDP2 | Resolve 11.3.1
Emilio Batungbacal
July 27, 2015 at 10:28 pm in reply to: MacPro reboots after switching to GTX 980

Yes I’m using Nvidias drivers.

Is it then ok to use my old GTX 285 and use it as a GUI? Since OS X 10.10 only recognizes 2 GPUs do I have to uncheck ”Use GUI for compute’ ?

Emilio Batungbacal
Colorist

Color Chemistry

2010 MacPro 2.93 12 core | 12 GB RAM | GT 120 | GTX980 | Cubix D4 | Dulce ProDQ G2 8TB | HP Dreamcolor | AJA HDP2 | Resolve 11.3.1
Emilio Batungbacal
November 23, 2011 at 1:18 pm in reply to: Storing in Memory I-Z, how to?

Thanks Rohit.
Emilio Batungbacal
November 21, 2011 at 10:52 am in reply to: With 8.1.1 BM has just thrown a very destructive blow to the entire C-grading business

I think the original thread focused more on the effect of the DaVinci Lites effect on the C-market.
Emilio Batungbacal
November 18, 2011 at 11:40 pm in reply to: ACES + RED = clipping highlights

Bottom one is ACES….??? I guess
Emilio Batungbacal
November 15, 2011 at 4:16 pm in reply to: ACES + RED = clipping highlights

I’ve had similar results Ola after playing with it a few weeks ago. I loaded some RED footage then set Resolve to ACES color science.

Input Device Transform to RED and L
Load Output Device Transform to REC.709

Uncorrected image was bright and blown out. I managed to bring the overall luminance down and came up with a pretty decent image. I did notice a bit of noise in the blacks though.

I’m not sure if I was going about this correctly.
Emilio Batungbacal
September 20, 2011 at 1:04 am in reply to: Does “Play Still” or F5 on Wave panel works?

Try turning the jog/shuttle to wipe the still image in after hitting F5 on the wave.
Emilio Batungbacal
February 21, 2011 at 4:38 am in reply to: To Charlie and Warren : Davinci panel combination keys?

Not Charlie or Warren but here are a couple more shortcuts.

+x ‘Preview Mem’ or -x ‘Preview Mem’ to copy grade. x is a number relative from your current scene. e.g. +2 ‘Preview Mem’ copies the grade 2 scenes after your current scene.

Will also work with ‘Play Still’. Most of these are 2K plus shortcuts.

Emilio Batungbacal
Colorist
ZAP! Visual Effects
https://colorist.batungbacal.com
Emilio Batungbacal
February 10, 2011 at 2:15 pm in reply to: Wiping memories

Thanks guys!

@Warren, yes I’ve seen all your vimeo vids. Helped me a lot transitioning from the 2K+

Emilio Batungbacal
Colorist
ZAP! Visual Effects
https://colorist.batungbacal.com

Page 1 of 2

1 2 →