Forum Replies Created

Page 8 of 10
  • Drizzt_g

    October 23, 2005 at 12:19 am in reply to: MPEG2 problem. Urgent!!

    You thought needed to buy a serial number from apple to run quicktime pro.

  • Drizzt_g

    October 6, 2005 at 4:02 am in reply to: Ram??

    If the RAM is the problem you should also try to take the original RAM out and just put your new ones in. Sometimes RAM from different companies don’t work well together. If that doesn’t work try every RAM by itself, if one is defective you will see it right away.

  • Drizzt_g

    September 27, 2005 at 12:38 am in reply to: Kona LS vs. IO LA

    I don’t know where latency can be a problem for capture.

  • Drizzt_g

    September 25, 2005 at 7:49 pm in reply to: Difference between 8 bit and 10 bit uncompressed

    Dan, the problem with HD on TV is that not only the network, but local stations have to be able to transmit the HD signal, but right now you need to get that signal on the special HD channels. Were getting closer and closer to a full HD program schedule across the board.

    As video editors we know its coming, we know the difference, we can see it, but try convincing the average consumer to buy an HD READY TV, the cost difference is to much especially with all the deals out there for SD big screen TVs.

  • Drizzt_g

    September 20, 2005 at 6:39 am in reply to: Hard drive question

    I don’t know about the OneTouch, but I know the LaCie and G-raid Firewire drives are good. You definitly can’t had a second internal hard drive in a Mac laptop.

  • Drizzt_g

    August 28, 2005 at 8:35 pm in reply to: GL2 and FCP5 = crash

    Make sure you don’t have anything else on the firewire bus other than your GL2.

  • Drizzt_g

    August 26, 2005 at 12:15 am in reply to: digi 002 and FCP

    1500$ seems low to me. Where did you get this number, I get 2000$ at zzounds.com. Where do u buy your stuff.

  • Drizzt_g

    August 25, 2005 at 11:49 pm in reply to: How full is too full?

    I’m with Tony, when you pass the 20% barrier any system will slow down and eventually crash.

  • Drizzt_g

    August 25, 2005 at 7:19 pm in reply to: Sony HVR-Z1U camera & HVR-M10U console HDV tape deck…

    So do you guys think the HVR-Z1U is a good investment or am I better off with a used XL1 or PD150/170 and wait for something better.

  • Drizzt_g

    August 23, 2005 at 4:07 am in reply to: FCP without deck, just a DVD burner?

    I’m with Hector on this one. And don’t forget that cameras are not really design to be use as a deck so the cost of repairs will increase. May be I’m wrong but I’ve always heard the heads of the camera are not good for this use.

Page 8 of 10

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy