Replies – Forums – Doug Calhoun

Forum Replies Created

Page 1 of 6

1 2 … 6 →

Doug Calhoun
March 16, 2016 at 7:16 pm in reply to: Effect failed to render

problem solved. Render media destination somehow was flagged to a “Recovery Drive”. Not sure how that happens but all is fine now.
Doug Calhoun
January 7, 2016 at 7:23 pm in reply to: Multiple HD’s and OS’s

No, it’s an older machine with a 500GB HD and I’ve stepped up to a 1TB 7200 for the space. BTW, do you know if the firmware upgrade on the LHe will negatively impact my existing 1.5.1 install on OS 10.6?
Doug Calhoun
January 7, 2016 at 6:09 pm in reply to: Multiple HD’s and OS’s

Thanks Robert, that’s what I understood but wanted to be sure. My drive arrived today so I’ll be getting it done this weekend. Thanks for your help!
Doug Calhoun
January 7, 2016 at 4:59 pm in reply to: Multiple HD’s and OS’s

So updating the drivers will keep the card from being backward compatible with the older OS and version?
Doug Calhoun
February 16, 2012 at 2:35 pm in reply to: Media 100 (Vincent) Version 7.5 software

Chad,

I’ve looked this am and have v4.0, v4.5, v5.5.2 and v6.0 then a gap through v13 which includes 7.X- 8.2.3.a. I’m not sure where they are. I even dusted off the P6000/w DV card which is laying there.

My copies don’t start up again until 13.X through the current Suites.

I’ll look in some other places but am doubtful….you may search the forum as there were some posts from last fall of some people running some old versions.

Sorry,

Doug
Doug Calhoun
February 16, 2012 at 4:31 am in reply to: Media 100 (Vincent) Version 7.5 software

Chad, I may have it. Send me a message if you still need it and I’ll check it out….

Doug
Doug Calhoun
October 21, 2011 at 9:31 pm in reply to: Need to trim a sequence but keep the markers….

Thank you very much Paul
Doug Calhoun
October 20, 2011 at 9:17 pm in reply to: Mastering Question

Thanks Dave, so considering it’s ProRes422 (not HQ), self contained would be identical ProRes 422 codec? Similarly, if I export a QT ProRes422, there would be no difference other than what QT does to it? I’m not sure what the difference is still unless Self Contained outputs Animation codec or a M100 flavor of uncompressed.

Any insights?
Doug Calhoun
October 14, 2011 at 8:22 pm in reply to: Mastering Question

To be clear, if I export as a “Self Contained” from a program with ProRes 422 footage, it will export what versus as a Quicktime with ProRes 422 selected? This was discussed before and it wasn’t ever stated what the difference was.

Thanks again for any input.
Doug Calhoun
October 14, 2011 at 7:50 pm in reply to: Mastering Question

Thanks Dave, I assume ProRes is as good an option as any then. I’m unsure what encoders, other than Compressor, which isn’t great for low bit rate QT codecs can handle a REF movie from M100. So an output to encode is likely needed. Is ProRes ideal in this regard or H264?

Page 1 of 6

1 2 … 6 →